Regular cab suspension

I have attempted to search the forum to answer my question but was unsuccessful, figured I should start there. So I have a 2004 Regular cab 4x4. I am going to do a suspension upgrade/lift. I am getting a little confused as I see manufacturers recommending not using their lift in the regular cab trucks, guess too light? So what lift do we put in the regular cab gen 1?

BK9504 - Bilstein lift kit with 5100 shocks for 95-04 Tacoma

** This lift is not recommend for Standard cab or Tacoma's with a 4 cylinder 2.7L engine size. Ride quality can be quite firm and you will achieve more than 3" of lift. **



OLD MAN EMU 1.5"-3" SUSPENSION KIT - 1998-2004 TOYOTA TACOMA

• EL122RA/B Rear Leaf Springs Will Only Fit Post 1998 Xtra Cab and Double Cab Models

 

reason is that kit is for armored trucks

• 112-620 Toytec front coil springs 620lb spring rate

wwwaaayyy to oheavy a load rating for the reg cab 2.7, even with bumper/skids


get yourself a set of 5100s with the OME 2880 springs