Relations Race Wheels 16x8 & 17x8.5 Restock | Code: YOTARH

I ordered few hours ago using the pre-order code didn't get discount applied

 

how much do these wheels weigh?
can the RR5-V be used without the bolts, or can they at least be color matched?

 

~27lbs and yes the bolts can be removed to be painted, PC'd, or replaced. I wouldnt run them open though, would look pretty trash with a bunch of exposed threaded holes.

 

They are lug centric wheels, the hub bore is 108mm. The hubs on Toyota six lugs are 106.1mm.

Also, anyone considering these wheels should be aware:

The RR4s for sure (and it looks like some of the other models) CANNOT be installed on the front corners of 4WD models with the factory axle nut/hub dust covers in place. The center bore of the wheels is too small and interferes with the dome of the cover. The only option is to run without the cover or to smash it down with a hammer until it clears the wheel. If you are running spacers, it wouldn't be an issue. For 2WDs it would not be an issue. I am running a set of RR4s on my wifes 4th gen 4Runner with NO spacers and had to remove the covers to install the front wheels.

Pay attention to the pics and look at how small the center caps are... any of the wheels with the small center cap will have this problem.

Ray, nor anyone else at RRW, will tell you about this issue before hand, nor compensate you for it after the fact.

You can see what I'm talking about in the picture below... notice how close the wheel sits to the cover, and this is with 1.25" Spidertrax spacers installed... without the spacers the wheels won't clear the cover.

 

Thank you for the info! Saved me some time and money.

 

The RR5-V and RR2-V are hub centric!

 

Yes the price includes shipping!

 

No, that's not okay and that only happens from carelessly installation of light nuts. That deserves a partial refund for being "Blems".

@RayRRW you gonna help this guy out if they went out to him like this?

 

Just put a set on today from a different manufacturer and they didn’t look like that. Refund

 

gosh dude, i was on my phone earlier and it looked bad. Seeing it now on my laptop screen, those are ! Since you picked them up i'd be right back at his place of business next week demanding a refund or another set. Do they all look like that?

 

Ship to Alaska if so how much?
Wasilla Ak 99623

 

Welcome to RRW.

Ray posts sales threads, doesn’t answer any actual questions, and doesn’t handle complaints or criticism.

They’ll sponsor you on Instagram though.

Solid pass on all of their wheels.

 

Almost ordered a set of theses glad I didn’t.

 

Likely being imported with no holes so they can be machined for 6x5.5, 5x5.x, etc.. someone let the build up scratch the finish during machining.

 

I was just about to order a set. I'm glad I read through these posts.

 

You're welcome.

So true, as evidenced by this thread.


I bought my set as a Black Friday deal, and only paid $518 shipped for the set of 4 wheels, including lugs. Had I paid any more, I'd have been kicking myself hard, but considering how cheap they were I wrote it off as "you get what you pay for".

Nonetheless, if a wheel is advertised to fit a certain vehicle, it should fit the vehicle as-is with no modification to the vehicle required.

 

Sup guys. Spoke to Ray this morning. He is willing to do an exchange and also explained that there are actually two types pre-drilled and blanks. So, keep that in mind. -and to make a long story short, it’s just a huge misunderstanding.. yall had me worried man. I guess I wasn’t a total fool, just misinformed. So in light of that I will be taking down all my post. Also, I may have to report any comments that are correlated with mine


The pre-order inventory is expected to arrive by next month. Just go on ahead and proceed with your orders.

 

My response:

Sorry for the late response. This is my finals week & graduation week so I was unable to go on and promptly to address the issues. @DangerClose and I spoke this afternoon to address the issue. The wheels were shown to him prior to purchasing them, so it was clear that were some minor scratches from machining the PCD on this set. We agreed that we are going to exchange his set with one of the pre-drilled sets when they arrive in 2 weeks.

If anyone has any questions or concern you can reach me directly on my cell @ (626) 537 - 9861.

 

You can correct on that. We brought in blank wheels to offer a wide range of sizes. We made sure to bring in more 6x5.5 pre-drill wheels in this shipment and the future shipments.

 

Hey @BigFishAllDay,

Terribly sorry about this situation in regards the issue with the center cap. I was unaware of this issue with the RR4. I'm going to take this back to headquarters to see how can we address this issue with you. Again I am truly sorry about this. Have a great weekend and you have a DM!

Best regards,