Relentless Fab rock rails Group Buy

That's fine, but can you post up a few detail pics of the installation from the underside, showing the proper orientation of the brackets and gussets?

It may be obvious to you, but you'd be surprised at how many possible ways there are to get things wrong when you're just looking at a pallet with parts on it.

I wouldn't be so boneheaded as to put a slider on upside down, but mounting a bracket upside down is fully within my capability. Measure twice, cut (or weld) once.

 

Does this help? I think the design is still the same

 

Yeah, steve, take a look at the pics Mike posted there below your post. Thats how they go together.

 

cool.

 

Is it too late to get in on this group buy?? I've got the cash to pay in full up front. Just let me know where and how to send it to you.

I'll take the 2x3 hybrid style for the Double Cab w/ short bed.
Just to be sure - this is 2x3 rectangular steel as base or main slider with 2" tube coming off. 2" box steel toward the frame which mounts to frame plates and gussets. Is this correct?

Also, any chance of seeing a picture with the doors open - what is the clearance? Step usage? Greatly appreciated!!!

Shipping to 17331. There is both a UPS store and a Fastenal close by- can mail to either. Please let me know total cost.
Thanks

 

Hey man, not too late at all! Still taking orders while I build a few remaining bumpers from my order list and then I'll be moving on to building these for everyone on the list.
Yes, you're right on the 2x3 being a rectangular inner rail with a 2" round tube outer. Those are what is on my truck, the white truck being lifted with the hi-lift in the OP. on the 2x3's, i'll also make the legs between the inner rail and frame from the 2x3 tube as well, so they're extra beefy! I can go take a picture with the doors open for you a little later and post up. Basically the outside edge of the inner rail is flush with the edge of the door sill, and then the round sticks out from there(about 3" between the 2 tubes). My gf is 5'3" and uses mine as a step all the time for getting in my truck.
I'll get shipping rate figured out asap. Still need to compare rates via both methods and see which one will save you guys money. Oh and for payment, I prefer using paypal; it lets me keep track of everything in one place and the money transfer is instant and secure.

Adding you to the list now...

 

Any overall discount if purchased along with your front and rear bumpers?

 

Yeah i'd knock off an extra 5% from the bumpers, and if they all ship together via fastenal, that would save you over a $100 vs shipping everything separate.

 

i may be interested

 

Cool just let me know. I see you're in oregon too. Maybe if there are enough people around here fairly close that all order them that I can just bring them to you guys instead of shipping...

 

Part of the reason I may be interested in getting sliders from you cuz were in OR! I just started thinking about getting sliders..I haven't gone off-roading and I probably won't anytime soon, but I want steps like nerf bars/running boards, but I think sliders look way better than those. Do you make sliders that look nice and tucked up and close but enough to use a step?

 

yeah all my sliders tuck up nice and close to maximize ground clearance offroad, but you can still use them and a step for getting in.

 

If you live in the Portland or Salem area you are welcome to try mine out.

 

Thanks for the compliments Larry!

 

Yo! Can I get mine changed to basics instead of hybrid w kickout? Thx! PM me the best way for pmt.

 

Ok so just the basic full round tube sliders for a DCSB?

 

great work RelentlessTaco!!!!

 

Thanks man!

 

DCSB hybrid style for me Eric!

 

wanna do the 2x3 hybrids so that you dont see so much of the frame due to your body lift? Thats what Cullen is going to do, I think i'd recommend it too if you can spare the extra for them.