1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

remote start help

Discussion in 'Technical Chat' started by mrp192, Apr 11, 2012.

  1. Apr 11, 2012 at 7:44 PM
    #1
    mrp192

    mrp192 [OP] REALLY!!

    Joined:
    Feb 21, 2009
    Member:
    #13911
    Messages:
    739
    Gender:
    Male
    First Name:
    Brent
    Cheney WA
    Vehicle:
    98 V6 4x4 limited
    Stereo, boobies
    Alright im having a little trouble installing my remote start in my 98 taco.. I havent put it to the truck yet, im trying to figure out the wiring first.

    So im trying to install a Viper 5101 with smart start. The problem im haing to the the H3 harness so the 12 AWG wires.

    H3/1 PINK (+) IGNITION 1 INPUT/OUTPUT = black/yellow
    H3/2 RED/WHITE (+) FUSED (30A) IGNITION 2 / FLEX RELAY INPUT 87 = black/red wire
    H3/3 ORANGE ACCESSORY OUTPUT = blue/red
    H3/4 VIOLET STARTER OUTPUT = black wire
    H3/5 RED (+) FUSED (30A) IGNITION 1 INPUT = black/yellow
    H3/6 PINK/WHITE IGNITION 2 / FLEX RELAY OUTPUT 30 = black/red
    H3/7 PINK/BLACK FLEX RELAY INPUT 87A key side (if required) of FLEX RELAY
    H3/8 RED/BLACK (+) FUSED (30A) ACCESSORY/STARTER INPUT


    So really what im asking is what do I do with the H3/7,/8 wires. and what the hell is the flex relay?
    I read some where that I should just tap the 3 fused wires together and put then on a constant 12V.

    If you could please help me out that would be awesome.
     
To Top