1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Replacing timing belt on 1999 Tacoma

Discussion in '1st Gen. Tacomas (1995-2004)' started by bengreen, Dec 29, 2011.

  1. Dec 29, 2011 at 9:10 AM

    bengreen [OP] New Member

    Dec 26, 2011
    First Name:
    Jacksonville, FL
    1999 Tacoma V6
    After replacing the waterpump, upper and lower pulleys on 1999 Tacoma, Prerunners and installing a new timing belt,the alignment marks were one or two groves ahead of the markings on camshafts.Each alignment marks were set at TDC on RH & LH camshafts and TDC oncamshaft. When I manually rotated the camshaft one complete turn, the alignment markingson the belt were ahead of the alignment marks on the camshafts. Have anyone experience thissituation before, and how can I correct the timing markings on the belt withthe alignment marks on camshafts.

    Thanks for your assistance.

    Ben Green

Products Discussed in

To Top