Request: pictures 3 inch lift with 265s

Wondering if anyone is running a 3 inch lift with 265s??

 

theres tons of pics and im sure there is thread already out there if you havent searched for one

 

check out my build... I had 265/70/17 now I have 285/70/17s

 

check my gallery.

 

Link?

 

http://www.tacomaworld.com/forum/builds/66059-solus694s-build.html

 

Thanks

 

~3'' on 265's:

Coil overs are pretty cranked, rear is on All Pro leafs that give about 1.5'' of lift.

 

check my build in my sig

 

Here is my '10 on 265/75-16 Duratracs, with the Toytec Ultimate Lift.

 

Look at my sig

 

What option did you use for the rear ?

OZ

 

Non TSB AAL.

 

So 1.5 " AAL ? Are you at 2.5 up front or 1.75 ? ,

Thanks ,

OZ

" You can't drink all day if you don't start in the morning "

 

The AAL added about 1.5" to the rear height.

When I first put the coilovers in, they were set at around 3" from Toytec. The truck sat level, but there was a slight issue. The ribs on my CV boots had way to much contact. With this setting, I was worried that I would wear out the CV boots prematurely. I adjusted the coilovers so the CV boots were not rubbing on each other. It just so happened that the difference in ride height, front to rear was almost exactly the same as the truck was when stock. There is no noticeable wear on my CV boots, or any other quirks that I have read about when lifting a Tacoma.

 

Here's mine 3'' BNC off road makes "spacer" on top of coils block in back. tires are 285/70r17 km2's xd addicts.

 

265/75/16 and 3" lift

 

That's the size I run on my truck

 

Bump...I need some pics of this set up