Reverse Camera Anytime Mod SOLD OUT

What's your shipping cost to Victoria BC Canada? Trying to decide if ordering your kit is worth my while.

 

Canada is an extra $5 usually through usps.

 

Awesome. That's not bad at all. I'll try and order one tonight if I get a chance.

 

Good deal!

I'll keep an eye out!

 

I have a 2011 and am curious also. Guessing mine is the same since the cameras were only in the mirror? Would like to do this mod with the factory looking switch but it'd probably be more trouble than It'd be worth. I know there is a write up to do it with a toggle switch in the plastic below the rear view mirror. Might go this route if I can find the thread again.

 

Your best bet would indeed be finding that thread. I do know that 2nd gen reverse trigger wires are in the drivers side kickplate.

Unfortunately I don't personally have a 2nd gen anymore to develop a kit with. But, I have had one gentleman adapt my 3rd gen kit with success on his 2nd gen recently

 

Do the kits come with step by step instructions on how to install hardware? Im interested.

 

Yes. Very easy to follow along.

 

Tag

 

Installed my kit last night, very easy and instructions are amazing. Works great!

For anyone installing, I did it at night and left my dome lights on...do not do this, I ended up blowing a fuse lol.

Thanks for your help and an awesome kit brendanwebster911!

 

Sweet! good deal. glad we were able to troubleshoot the blown fuse so fast!

 

This is the thread I started for anytime GPS. Maybe will help with anytime nav!

www.tacomaworld.com/threads/input-gps-anytime.472445/

 

In. I have a 2015 but I hope someone tries it on 2nd gens so I can buy this!

 

Will this work on a 2nd gen 2015??!?

 

i have had two guys try so far, it works, but they had to find their own wire locations and adapt everything to their truck. my instructions and kit are specific to 3rd gen only.

 

I Was finally able to install mine this weekend!. Instructions where really helpful and everything was super straight forward. All works great!

Thanks again Brendan.

 

Will this work on a 2015 Tacoma. If it does I'd like to order the kit with the switch with the diagram of the camera on it. Thanks.

 

Really am wanting this. Have a 2017 SR5. How hard is it to remove radio? Just want to be careful and not break anything?

 

Very easy to remove. It pops out, and then there's just 4 10mm bolts after that.

 

It can work, but, like I said the instructions are specific to the 3rd gen. You'd have to be creative, and locate your own reverse wire, and a 12VDC source. After that, everything is the same