Roof weatherstripping and fog lights from 2017

These were removed from a 2017 DCSB. Great condition. Lights have no cracks or broken tabs. Weatherstrip $100. Fog lights $50 OBO


Thanks for looking. Send PM if interested Freight negotiable

 

What model did these come off of? I'm looking for a set of the wide angle fogs that come on the TRDs.

 

The are off 2017 DCDB Off Road.

 

you willing to ship the weatherstripping? does the metal stiffener in it prevent it from being able to roll up to fit in a flat rate box?

 

What you are referring to is just the bezel. These are essentially interchangeable. There are differences in the light options as well, but most folks will state what those are beyond stock (as I recall, ORs had a higher Watt, but not by much.).

 

@Dilly - how small could you pack these?

 

I tried following what is it his trying to ship but with limited time at work I couldn't tell. If its the drip moldings, I shipped mine in a long duster box. I went to walmart and asked one the guys that work in the warehouse for a box that would be able to ship a fishing poll in. (that was the best reference I could think of lol). The box measured out 4" X 2" X 58" weighing 1.96 lb scale display. Of course that weight could change depending on how much protection you use and box size. A 60" (5'-0") would work better, I had to leave the end tab on one side of the box open a bit and capped it off with tape. (it was an inch or so to short) Hope this helps my friend . Stay safe

 

I should be able to roll the weatherstripping are put it in the smallest package available. Buyer pays freight. If you have other questions please let me know. Hope everyone is staying safe.

 

Yes

 

Check to make sure, but I think the issue is that there may be a stiffener in the long section. I recall that the front was pretty flexible and I know that the rear part separates, so it would have to be in the section over the rear doors, if it is there. Otherwise, could roll to about a 2-3’ diameter without likely damage. Dilly just shipped some, so I figured who better to ask. It wasn’t cheap though.

 

thanks. that's what i was thinking.

 

When I ordered replacement weather stripping it came in a long triangle box it was shipped flat. The metal strip in it will not straighten out if shipped flat

 

Thanks for the info. I’ll get a box figured out and let everyone know how it will ship.

 

I have a HD cardboard tube to ship this in so that they will lay flat. I’m selling these for a friend. He said he sell them for $130 shipped. Hope everyone is safe.

 

Check rate to Hawaii , I think @hirod wants them...

 

All, just took a look at the ones I took off, there is NO rod/metal insert. I was able to coil the weather strip up to about a 24” coil. I flexed the thicker outside with the underside rib to the outside of the curve. I would recommend not coiling until ready to ship and uncoiling while laying out in warmth to relax/return to form. This may help others.

 

$130 to hawaii?

 

I’ll find out. He gonna check freight on Monday. What is your Zip?

 

sorry. disregard. somebody found me a set.

 

Ok thanks for letting me know. Stay safe and healthy.