Sacrifice's Crunchy Taco

What causes this? I've seen it happen on a few of the newer tacos

 

Mine are because they don't have the lower mount anymore since I trimmed my fenders

 

Just sacrifice things

 

ordered a few parts needed to get my oba together all the way. thanks @Crom for keeping a detailed list of his install parts

so since i went with the viair constant duty setup i needed an air hose from the compressor to the tank and from the tank to the bed cubby (where im mounting my air chuck hose).

ordered:

25ft of the flexzilla 3/8inch hose (this should be plenty to go from the cab to air tank which will be under the bed and have enough to make another hose for tank to cubby.

$24 Flexzilla Air Hose, 3/8 in. x 25 ft., 1/4 in. MNPT Fittings, Heavy Duty, Lightweight, Hybrid, ZillaGreen - HFZ3825YW2

https://www.amazon.com/gp/product/B0021WVO8W/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
90 degree 1/4npt female to male connector

$16 Parker VS1202P-4-4 Street Elbow, 90 Dig, Brass, 1/4 in., NPT

http://www.amazon.com/Street-Elbow-...&redirect=true&ref_=oh_aui_detailpage_o01_s00
2: 1/4inch npt barb fittings with 3/8inch flow to make the shorter hose

$4 Tru-Flate 21-143 Male 3/8" Hose ID Hose End Fitting

https://www.amazon.com/gp/product/B000CFNKBO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
1 pack (qty 2) 1/4inch npt quick connect barbs

$8 Milton Industries S-761 1/4" FNPT HIGHFLOWPRO V-Style/European Interchange Brass Air Plug Fitting (High Volume Low Pressure Application), Pack of 2

https://www.amazon.com/gp/product/B003V5NQ2U/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
2: 1/4inch npt quick connect females

$11 Milton S-764 1/4" FNPT HIGHFLOWPRO V-Style/European Interchange Air Coupler Fitting (High Volume Low Pressure Application)

https://www.amazon.com/gp/product/B0000AXC95/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

so should be compressor through cab wall --> 90* fitting --> quick connect female --> quick connect barb --> air hose fitting --> tank
air chuck hose (1/4npt fitting) --> quick connect barb --> quick connect female to barb fitting --> air hose --> barb fitting --> air tank

 

Check us out on here for Chicagoland thread or on fb. Chicago tacomas and chi town offroad toyotas. May get a groups to go end of May/June time. Waiting for it to get warmer and bust out the rtt

 

Bout time lol

 

Still need to get rid of everything hanging off the back. Damn that hitch!

 

Yea. One of the reasons I want to go HC to get rid of that annoying ass thing lol

 

I was pricing out stuff to make a bumper now too, expensive but still cheaper than buying a premade

 

True. I don't have the knowledge or ability to haha. Plus I like pelfreybilt one so it'll be a bit of saving up but I'm going to snag one lol

 

I have a friend that does fab work, I just need to design it and I'll have him weld

 

Pulled my skids off go pull out the driveshaft which is getting dropped off tomorrow to be retubed. They said they should be able to make it 0.095 wall instead of the stock 0.060?

Skids got straightened as a result too.

In other words don't do this kids

 

The .095 is much better than the stock.

 

So 060 is stock? I thought it was 081. Either way, bumping it to 095 has got to help. Excited for your results.

 

Think that's what I read in @NwiTACO thread from when he had a few.

Yea I'm excited as well, decent price for getting it done as well

 

@G.T.

 

Yea that's a huge difference. Between that and just being more careful I hope to make it last

 

Key word - Hope

 

New driveshaft installed already and wow is it nice having a smooth ride at highway speeds again! Was a half-day turn around to get the rear retubed. Pretty damn quick

 

Had a get together in KC at 4wheelparts and had some BBQ afterwards