Onboard Pressurized Water System for the 2005-Current Toyota Tacoma OBW

Thanks guys

 

Still need to adjust hoses to work out the kinks, but its wired and ready to go. Just need the power harness.

 

However you like it

 

Looks really good.

 

I also now have an extra wiring harness that comes with the standard kits. Someone was asking to buy just a harness but i dont remember who... if anyone needs it feel free to PM me.

 

Here's what it looks like. Oh, and I upgraded the hose because mine had a kink in it from when it was shipped.
Tried it a couple of times already and works like a charm. I could probably do with just two nuts, but...it's up to you.

 

Do you still have a full water system available with the pump, wiring harness, tubing, etc.?

 

20 kits left. Got your PM

 

So I finally got around to installing this over the weekend. Went much easier than I thought. Turns out I had one of the kits with the different connectors, but that wasn't much of an issue. I stretched this out over two days cause it's just too damn hot down here in Louisiana. Ended up moving inside after a while. Tested everything and had to tighten a few connections, but now everything is running nice and smooth. Thank you @ProForce for such a great product!



Highly recommend the use of a unibit. They're a little pricey, but very effective and can be used for future projects.



I painted the pick up line blue just to remind myself which one goes into the water source.



These were the connectors on the harness. All of them were rectangular with the exception of this one on the bottom.



Who says you can't put a square peg in a round hole? Really not an issue, just flexed out the sides a little bit and gently pushed it together.



Initial testing followed by some minor adjustments.



All packed up after adjustments. As you can see, I did the self contained version where everything is in the cubby. I was worried about getting everything in, but this was a lot easier than I thought. I trimmed about 10" off each hose which I believe was necessary for fitment. Getting everything to fit in the cubby is a little tighter than I thought, but it does all fit. The only issue I had was that I knocked the boot off of the switch a couple times. It slides on easily, so no problem.

 

LIMITED TIME! 10% OFF PLUS FREE SHIPPING - THIS IS MY LOWEST PRICE EVER OFFERED ON THESE KITS! LIMIT 5 KITS AT THIS PRICE - SALE ENDS SATURDAY AUG 26TH OR WHEN 5 KIT LIMIT IS REACHED - $180 SHIPPED!!!

 

4 left at the sale price

 

Is that all the kits that are left total? I am interested in a kit, but am paying for some other things currently.

 

Do you have any photos of the Switch Pro setup?

 

19 kits left overall. I am just limiting the sale price to 4 more kits. You're good

 

I have completed my portable ammo can kit

To convert my current kit into a portable one cost me about $40 in parts. Shipping would go up about $5 because I will have to purchase packing material and boxes now. I will get pics/videos up this weekend but I am considering a limited run of 5 portable kits. The cost will only be increased by my cost to produce and will have no additional markup. The 5 intro kits will be sold at $245 shipped and will have a 2 weeks lead time on production. This is a feeler to guage interest. Please let me know as I wont start making them until I have at least 3-5 buyers. Obviously im sure many will be on yhe fence pending pics/videos but so far this thing is awesome!!

 

Not yet, as I have not wired it up yet. Will be a while to be honest. Happy to upload some photos once done if you are interested.
Thanks

 

Look forward to pics/videos.

 

It was me who was interested in just the harness, but you have since sold me one.
Thanks!

 

Happy Friday everyone. Last call for the discount pricing!