San Antonio

I now have mine at the +1 so I could get to the castor setting I wanted.

 

Extra parts

 

I have them set to 0 degrees now how do I know if I need to move them

 

Well they aren't gonna install themselves....

 

can't do it man gotta go to work in an hour by the time I get my taco in the garage jack it up take the tires off that pretty much all I can do

 

https://media.giphy.com/media/fQoxwZBVWq5jhLXRty/giphy.gif

 

If you were doing it and had to change lower control arms to would you do upper or lowers first

 

Well the shock would need to come out the lower, but I would just do a side at a time and them move the next one.

 

I'm trying to figure how I'm gonna hold a 300 lb maxtrac spindle in the air if I take the lowers off I guess with wire or rope

 

Leave the spindle connected to the UCA, if you need to use a bungie cord to help hold it while your work on the lower. This will keep the brake line sensor from getting messed up and not stretching the wire.

 

So after the lower is on use a jack to hold the lower up and put the upper on

 

You will still need to control the spindle once you disconnect the spindle from the UCA.

 

Shes on boys and im so in loveee

 

Love it Robert, but now everyone gonna give you grief about those running boards!

 

I know right? Need sliders but need money too lol. Figured the steps would help for now, better than nothing lol

 

Had to cut the fender liners a bit back so they would be hanging, other than that just a direct bolt on thank you @05prerun82

 

(don't look at my "off roading preventers!")

 

Everyone ok? Be safe tonight with the protests tonight

 

Sweet

 

Looks great...looking forward to seeing it up close

I think everyone is at home, I was told to leave town around noon