Scottsdale mod day August 26/27

I'm going to host a mod day at my house in Scottsdale on the afternoon of the 26th (saturday) and all day on the 27th. Anybody is welcome.

Theres room for 1 (maybe 2) truck in the garage and 2 or 3 in the driveway. Street parking, no HOA. I lack tools so anything beyond a basic set of ratchets, a soldering iron and a torque wrench will have to be brought. I'm going to pick up a popup and possibly some other tools with my next paycheck.

I'll be buying a few pizzas and some drinks for anybody that wants to come bye.

No safety meetings here, house rules that my roommates and I agreed on when we moved in.

If you want to join PM me for the address. I don't want to post it openly


***UPDATE***

Moving the Saturday portion to @Techoma 's place. Sunday is still good to go if anybody is planning on coming over still. Check the most recent posts for updates.

 

.

 

Who wants to do what?

@Adventurer_Alex - Body mount bushings
@stumbles - Body mount bushings and ?
@Istan- ??

 

What part of Scottsdale?

 

East side, 101 and chapparal

 

My priority would be changing my front coils and ECGS bushing install so I can try to get an alignment in Phoenix.

Also have rear leafs and rear shocks to install but I can do that back at my place.

I can bring food, small tools, jack stands. I lack 1/4 drive tools though.

 

Should have @RPain 5100 rears by then, I'm probably in for this.

 

I'm interested.... Would like to check out those cab mount installs.

 

I might be into this... and might hop on that body mount bushings band wagon. Sub'd to remind myself.

 

Do I need change the title to body mount party?

 

May need to add my Uca install while I'm at it.

 

@Istan do you have the puller for the bushing? I need to do this on my truck and replace the seal because it leaks.

 

ECGS Driver's side needle bearing? If so, yes. If you need it ASAP, I can mail it or meet up Friday to give it to you.

 

I dont have the bushing, my truck has manual hubs , and it is a 2nd vehicle. So no rush. It only leaks in 4wd. I just figured if you were going to do it that day maybe I could borrow the tool in trade for lunch or something if youre interested in some free lunch. Haha.we could do them together. I have the tie rod puller that is a big help... I was going to try and not take my CV out of the hub and just pivot the spindle because the manual hubs add alot of work to get it out on both sides.(hub and dif)

 

@JTB727 10-4.

Looks like my plan is going to be getting the front coils and ECGS bushing installed. Run to get an alignment. Come back to install UCA if I need to.

 

Do you already have the UCA's? I would just install them if you have them.

 

I do have them. Part of me says, you already have it, just install them. The other part of me says, you may not need it so find out first.

I'm a better to have and not need than need and not have but really have only if needed.

 

Easy.
Socket wrenches. Beer. Shade!

 

Want to pick up @RPain leaf pack for me and bring them with?