SCS wheel side poke

-10 offset
285 tires

please show photos guys

 

-10 Blaze10's

 

For some reason… I’ve been distracted.

 

Scs blaze 10 -10 offset on 285 70-17

 

What are your lift specs? I have a set of Blaze10s, still thinking about lift and tires.

 

I have the eibach stage 2 coilovers with the 2R rear shocks, and 3 pack add a leaf in the rear. im also running OME upper control arms. I left the front coilovers set to what they were out of the box, so im getting around 2.5" of lift in the front, maybe a tiny bit more. The rear aal should have added around 1.5"
Love the blaze 10's, they look good and are relatively light compared to some other aftermarket options

 

I got the F5’s guys with a 6” lift and -38’s
285/75/17 grapplers 6 ply

the mix of lift and offset it feels to rough

-10 where i need get to just need that real good side poke photo

 

If you feel like the ride is too rough, that's mainly from your shock and spring combo.

 

Ok while technically 275/70-17 when we put these next to a 285 70 version of this tire on the same wheels in the shop the width difference between the two sizes was only a couple tenths of an inch and hard to tell the difference.

 

A smidge taller, but same width. 285/75/17 on SCS F5 17” x 8.5” w/ -10mm offset Matte black.

 

with all those mods it will be rougher

 

Rigs looking good