1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Selling my baby :(

Discussion in 'Buy / Sell / Trade' started by Pacman 4Runner, Jul 9, 2013.

  1. Jul 9, 2013 at 7:36 PM
    #1
    Pacman 4Runner

    Pacman 4Runner [OP] Q RUNNER

    Joined:
    Nov 14, 2011
    Member:
    #67030
    Messages:
    31
    Gender:
    Male
    First Name:
    Paul
    Ft Irwin
    Vehicle:
    90 V-6 4runner 4x4
    3in lift, 33's
    After long debates I have decided to sell my baby. It is a 1990 4runner 5speed 4x4 that I have dumped my heart and wallet into. Here's a list of some parts and upgrades.

    300mi on newly rebuilt engine 3vze (not the best but runs like a top)
    -rebuild parts all from LCEngineering
    -all bearings and seals replaced
    -ARP head studs (to help with the 3vze head gasket problems)
    -LCE headers (drops the crossover under the trans also helps the head gasket
    problem, keeps the rear cylinders from being overheated)
    -full Magnaflow exhaust from headers back (has test pipe in place of cat., easy
    to bolt a cat right back in place)
    -new starter
    -new rear axle seals
    -new torsion bar adjusting bolts and nuts
    -33x12.5x15 Goodyear MTR with kevlar (about 500-1000mi on them) has 5 so
    you have the same tire and rim for spare.
    -EGR has been deleted
    -custom front bumper, rock sliders and roof rack
    -battery has been relocated to rear of truck
    -ProComp 3.5" rear lift springs
    -all new tie rod ends (inner and outer)
    -all new ball joints (upper and lower)
    -previous owner put 2" ball joint spacers in front and jacked up torsion bars so
    it had to be lowered back down a little when I had the alignment done.....
    wasn't a big deal to me because I was planning on doing SAS but ran out of
    $$$

    Runs and drives good and the headers gave the 3slow a good bit more power
    I have more than $7k into it and am asking $5000 but price is always negotiable and this would make a great truck for any project platform also open to trades let me know what u got :)

    You can contact me through email bandit88211@gmail.com and if you want to call email me and I will give you my # and I can send more pics if needed.

    IMG_20130702_110940_961.jpg
    IMG_20130702_110955_943.jpg
     
To Top