Show me the best looking rims 1st gens!!

Another backspacing question: What are you guys finding is the ideal backspacing for 285/75r16 with ~3" lift front and rear? Trying to keep trimming to a minimum, but want to avoid frame and UCA rub on the trails.

Currently running 31/10.5 on stock 15x7 with Bilstein 5100s, OME coils up front and Dakars in the rear. Looking to move up to 285/75 duratracs on 16x8

Disclaimer: I've read all the forums and I've heard anything from 3.5-4.5

 

17" 4 Runner wheels w 285/70

 

Your new tires would be 32.8/11.20-16. So basically 1” taller and wider.

 

Thanks..
I'm aware of the tire size. I'm looking for guidance on backspacing. I'm familiar with how it all works, just need to figure out what will work best. I want to stay away from spacers so I plan on buying wheels with the proper BS. 3.75BS wheels are hard to find in 16x8 so in reality I'm between 4.0 and 3.5... Will 4.0 be too narrow (rub frame, UCA?) Will 3.5 be too wide (require serious fender trimming?) Is 3.75 the ideal BS?

 

What size tire?

 

I have scs f5’s 16*8, 3.5bs, -25offset with ome lift. No trimming required

 

No trimming at all? No rubbing even in full lock? Good to know. Thank you

 

Anything deep lip for 33+tires woll look nice.

These are 18' Mavericks

The quality isnt the best, but they look decent?

 

Powder coated 4Runner wheels

 

Still love my stamped steel D slots though.

 

15" American Racing Mojaves

 

nk2k2 - are those 16x8?

 

16x7

 

Just mounted these bad boys up mostly for the backspace and needing 17”. Really like the way they look

 

how about just stock...

 

What size tire are you running? How close is it to the upper control arms?

 

I gotta look for a good pic but I have the turd gens with some ko2s on them. Not big though I think there 285in height?

 

255/80r17 and they’re a little less than a inch from the UCA. I’ve got Total Chaos UCAs. The coopers run a little smaller than other tires of the same size though

 

Thanks. I was thinking about running thoes in 285 and i was concerned with the tires hitting the control arms.

 

It may close and possibly require a spacer