Show me your Vinyls, Badges, and Graphics!

I'm a software engineer, so I found this perfect sticker for me haha. (the ugly N is required by law for new drivers in BC)

 

My first mod on the outside of the truck.

 

Here's mine...didn't really care for the chrome badges and also wanted to fill in the tailgate. And of course, had to represent the Hawaiian/Filipino pride

 

Please share, I want to know as well.

 

omg the tiny trailer on the ball mount lol

 

Of topic, what size rim and tire combo? 265/70/17?

 

Exactly. I had researched the largest tires/wheel combos here without any leveling or lifts. I went with the Falken WildPeak A/T tires at 265/70/17 & Black Rhino 17x9. I did have to remove the mud flaps that came with the truck cuz it was too close to the front tires when fully turned and didn't want to modify/cut/shave the muds in front so I just removed them all. I have the stock shoes (with 30 miles on the tires no less) and mud flaps on Offer Up since Feb. Also removed the running boards that came with the truck from the factory - just prefer without them. You can still see the running boards on my profile pic though, lol.

 

One little sticker...

 

Just added the TRD in the middle

 

The tiny camper hitch is amazing!

 

is that an aftermarket grill?

 

X-Trek. It took a minute to find a solution to black out the tss sensor, but I've been real happy with it.


https://www.tacomaworld.com/threads/x-trek-grille-insert-option.521061/

 

Any Misfit fans here?

 

Here's mine

 

What offset are your Black Rhino 17x9 wheels? I'm thinking about putting that size tire on the stock sport wheels which have a 30mm offset .But I'm concerned about rubbing and I want to keep the mud flaps on there.

 

Best job I ever had.

 

I believe they were 0 offset but can't be sure. I tried calling the local shop I got them from back in Feb and he's 99% sure because he called Black Rhino to make sure they would fit the truck, esp since the stock factory wheels are only 7.5" wide and these were 9" wide. The only way to be sure is if I go back to the shop for them to take off one of the tires and look at the back of the wheel.

But to answer your question, I've read other threads here and know that others have put that same size tire (265/70/17) on their stock/factory rims without any rubbing issues or having to take off mud flaps. If your truck came with 265/65/17, then the tire I chose is barely an inch taller so there's plenty of clearance for that. I only took off the mud flaps because the wheels are 9" and it barely cleared the front mud flaps when the front tires were fully turned so I didn't want any issues & just took all the mud flaps off.

I hope that helps you out.

 

Good stuff! Missing the bottom portion though: "K-9 LEADS THE WAY EVERYONE ELSE STEPS IN DOG CRAP"