Show us your wheels..

looks awsome man, what do u have the 5100s set at?

 

1.75".... I still have a toytec 1.5" AAL to be installed aswell

 

Silver FJ TRD SE's

 

couldnt stand the look of those stupid raised posts on the star caps. also sanded and rattlecanned the stars matte black.

 

Moto Metal 951s

 

old pic but i'm still happy with

 

some ideas....leaning towards Method....sorry if I posted this up in numerous threads...but some of us like to see what it possibly could look like before we pull the trigger $$...so helpin out a brother who wants to see ideas

 

american outlaw buckshot 16 inch

 

.

 

TX Pro Wheels (16)

 

Nothing but stockers here. Hope to have some one day or kinda want to paint them black or gun metal gray, but I skeered.

 

Looks like this thread needs a revival and I wanted some ideas on wheels. I have 2 sets of wheels, 16x7 stock steel with 285/75/16 BFG AT in front, not running spacers, only rubbed on the mud flaps and the front rain nipple, which I cut the rain nipple and remove the flaps when I run em', and 305/70/16 cooper dicovery stt's in the rear. I know, they're not the exact same size, but I like a staggered look, and they are basically the same diameter(only off by 0.1%). And I have a matching spare in 285. I painted the rims with black BBQ grill paint. I chose this because it was black and it was cheap and these wheels will only be used for winter use and off road use. I normally run all four tires at 30 psi on road, and 20 psi off road. I also use n2 in them as well.(I get it for free). Here's some pics.









Also I have the 18" chrome clad limited wheels, not sure of the rest of the dimensions. I run these with spider trax spacers, and stock 265/60/18 bridgestone dueller h/t's. I run this set up in the non snowy months and get about 4 more mpg than what I get with the larger set.(20mpg vs. 16mpg) I kind of enjoy the chrome look because the rest of my truck has no chrome, and these I think off set the base model SSM just right. I have been trying to find someone who wants to take the clad off of theirs and trade them the spare off mine for one of their clad ones, but no luck. You'd think someone would want an unused tire and less work to do. I have these pressurized to the factory spec of 32psi, and nothing but n2 goes in. Here's pics.





I've run just about every stock wheel there is for the 2nd gens. I originally bought the truck with the steelies, then traded those for the 17" sports, then traded the sports for the 18's. I also bought 16" TRD OR's, then traded them for steelies. My favorite so far have been the 17" sports and my least favorite have been the 16" OR's. I would trade everything I got for the Ivan Stewart rims though, and I had a chance to do it too. All I would have had to do was drive for 6 hours and trade the OR rims. Oh well, eventually that opportunity may rise again. So, lets keep this thread going, and I'd like to see all the different set ups every one has.

 

American Outlaw Hollywood's 17

 

http://www.tacomaworld.com/gallery/showphoto.php/photo/337945/cat/500/ppuser/78108

Tundra / Sequoia wheels

 

18 x 10 Fuel throttle w 4.5bs and 285/65r18 cooper at3

 

Here's my take on the Stock Sport Wheels...




Mine, started out like this....



Then Wire wheeled...



Primered with Zinc Chromate and Sandable Primer:



Looks better like this, I think....