1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Shrockworks Sliders Installed...Pics...

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Neubs, May 18, 2009.

  1. May 18, 2009 at 4:44 PM
    #1
    Neubs

    Neubs [OP] Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,024
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    Well, after finishing Graduate School this weekend I finally had a little time to install my Shrockworks sliders. :) They have been sitting in my basement for well over a month and not being able to install them was absolutely killing me. :mad: At any rate, my neighbor helped me with the installation and everything bolted up rather easily. To install these you have to drill three 1/2" holes in each frame rail. I was surprised to find that the metal used in the sliders is thicker than the frame rails (at least it looked much thicker). The packaging was top notch and everything arrived without a hitch. I would recommend these in a second and am very happy with the quality of the product. Sorry in advance for the poor pictures. I will try to post some better pictures up tomorrow. Thumbs up for Shrockworks and to Andy for all of his help!

    Packaging:
    [​IMG]

    Tools:
    [​IMG]

    Passenger Side Ready:
    [​IMG]

    Passenger Side Done:
    [​IMG]

    A Closer View:
    [​IMG]

    Driver's Side Done:
    [​IMG]

    Driver's Side Again:
    [​IMG]

    Top Down:
    [​IMG]

    Close Up:
    [​IMG]

    Front Bolt:
    [​IMG]

    Middle Bottom Bolt and Rear Bottom bolts are carriage style:
    [​IMG]
     
  2. May 18, 2009 at 4:46 PM
    #2
    jdkeller

    jdkeller How many words can be fit in this s

    Joined:
    Nov 26, 2008
    Member:
    #11040
    Messages:
    12,983
    Gender:
    Male
    First Name:
    Jonathan
    Inland Empire, Ca
    Vehicle:
    2008 Tacoma Prerunner TRD Offroad
    Dome light LED, 6000k HID Headlights and fogs, Grillcraft black mesh, rear 5100's, Total Chaos UCA's, 285/75/16 BFG KM2's, Spidertrax spacers, Blacked out emblems, cb,kenwood tm270 ham radio, All Pro 3" leaf pack, Fox 2.0 coilovers, Revenge Fab Sliders, u bolt flip kit, Pioneer avh4200, bed bar with light and antenna, Wet Okoles, Weathertech Mats, Wet Okole Armrests, Rear KR Fab bumper, bed mat, N-Fab spare tire carrier with full size spare on 16" TRD rim, Bedlinered flares and grille. Camburg Spindles, All Pro front fenders.
    look great man. You have a nice truck.
     
  3. May 18, 2009 at 5:17 PM
    #3
    Neubs

    Neubs [OP] Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,024
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    Thanks! It is a work in progress....:)
     
  4. May 18, 2009 at 5:26 PM
    #4
    DriverSound

    DriverSound Señor Member

    Joined:
    Mar 29, 2009
    Member:
    #15329
    Messages:
    3,683
    Gender:
    Male
    SoCal
    Vehicle:
    15 DCSB OR 4x4 & 15 Mustang GTPP
    Too few to list. 10 4runner SR5 4x4- 09 Pre-Runner TRD-OR AC- 14 Prius Two- 08 xB
    Nice bolt ons but I was thinking about the supports... only 3? How much $? I was looking into R-Fab.
     
  5. May 18, 2009 at 5:31 PM
    #5
    DriverSound

    DriverSound Señor Member

    Joined:
    Mar 29, 2009
    Member:
    #15329
    Messages:
    3,683
    Gender:
    Male
    SoCal
    Vehicle:
    15 DCSB OR 4x4 & 15 Mustang GTPP
    Too few to list. 10 4runner SR5 4x4- 09 Pre-Runner TRD-OR AC- 14 Prius Two- 08 xB
  6. May 18, 2009 at 5:32 PM
    #6
    jdkeller

    jdkeller How many words can be fit in this s

    Joined:
    Nov 26, 2008
    Member:
    #11040
    Messages:
    12,983
    Gender:
    Male
    First Name:
    Jonathan
    Inland Empire, Ca
    Vehicle:
    2008 Tacoma Prerunner TRD Offroad
    Dome light LED, 6000k HID Headlights and fogs, Grillcraft black mesh, rear 5100's, Total Chaos UCA's, 285/75/16 BFG KM2's, Spidertrax spacers, Blacked out emblems, cb,kenwood tm270 ham radio, All Pro 3" leaf pack, Fox 2.0 coilovers, Revenge Fab Sliders, u bolt flip kit, Pioneer avh4200, bed bar with light and antenna, Wet Okoles, Weathertech Mats, Wet Okole Armrests, Rear KR Fab bumper, bed mat, N-Fab spare tire carrier with full size spare on 16" TRD rim, Bedlinered flares and grille. Camburg Spindles, All Pro front fenders.
    My revenge fabs should be at my house any day now :D
     
  7. May 18, 2009 at 5:32 PM
    #7
    silver07taco

    silver07taco Well-Known Member

    Joined:
    Apr 27, 2008
    Member:
    #6241
    Messages:
    4,554
    Gender:
    Male
    First Name:
    COIL
    Maryland
    Vehicle:
    13 Tundra RCSB 5.7 4x4,07 Tacoma AC 4.0 4x4
    2013 Tundra RCSB 5.7 4x4, 2007 Tacoma AC 4.0 4x4
    Lookin good dave!, Time to get the ARB on, Ive been lookin about for a new front bumper.
     
  8. May 18, 2009 at 6:59 PM
    #8
    Neubs

    Neubs [OP] Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,024
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    Ha ha ha. Thanks for the complement. Yeah, I know about the Skoal. I dipped Kodiak for years. I switched to the candy a year back. I almost went with the three tube supports and decided last minute to go with the two support tubes. I don't wheel my rig that hand so to me two just made sense. :) The three tubes do look killer though!

    Thanks. These things are stout! They are about 62 pounds each.

    Hey Kyle, Thanks, I have had the new bumper in my basement for a while too. I have a Warn winch on order and some synthetic line as well. I already have the IPF lights. This week I am going to order a winch switch from 12 Volt guy and some Delrin rollers from Viking. I am going to put the bumper on as soon as it all comes in. :)

    PS - I also still have to install the 3 NST pulleys I bought back in March....
     
  9. May 18, 2009 at 7:23 PM
    #9
    Neubs

    Neubs [OP] Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,024
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    I appreciate the kind words. :) Yeah, the packaging was kinda funny, it was a mix of shredded cardboard, wrapped compression foam, and spray foam, but hey it worked. ;)
     
  10. May 21, 2009 at 10:24 AM
    #10
    Neubs

    Neubs [OP] Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,024
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    I finally washed her up and was able to get a few photos with the new sliders:

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]
     
  11. May 21, 2009 at 10:45 AM
    #11
    tacomanoob14

    tacomanoob14 Member

    Joined:
    May 21, 2009
    Member:
    #17496
    Messages:
    7
    Gender:
    Male
    SACRAMENTO
    Vehicle:
    07 SR5 DOUBLE CAB
    STOCKER
    everything about that truck is sick!
     
  12. May 21, 2009 at 10:56 AM
    #12
    Neubs

    Neubs [OP] Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,024
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    Thanks man. I appreciate the kind words. There is still more to come....:)
     
  13. May 21, 2009 at 11:05 AM
    #13
    Dark Knight

    Dark Knight Well-Known Member

    Joined:
    Jul 18, 2008
    Member:
    #8006
    Messages:
    9,594
    Gender:
    Male
    First Name:
    Jeff
    NC/SC
    Vehicle:
    4Runner Trail
    man thats so sweet, what was your wait time
     
  14. May 21, 2009 at 11:30 AM
    #14
    Neubs

    Neubs [OP] Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,024
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    I ordered them on 20 February 2009 and received a shipping confirmation on March 25th. I received them a few days after on the 30th, so my wait time was about month and a week. They quoted me 10 weeks and delivered them in 5 so I am happy. Well worth the wait in my opinion. I would have put them on a lot sooner but I simply have not had the time.
     
  15. May 21, 2009 at 11:44 AM
    #15
    Anathollo

    Anathollo www.saveadane.org

    Joined:
    Feb 25, 2009
    Member:
    #14071
    Messages:
    1,295
    Gender:
    Male
    Houston
    Vehicle:
    07 Tacoma TRD Sport
    Icon coilovers, Rear Fox Resi-shocks, 285/70/17 Toyo A/T's, Touchscreen JVC Headunit, Custom Rhino-lined sub box, Rocksford Fosgate components and Dual Rockford Fosgate 10" shallow subs, Pioneer and Rocksford Fosgate amps, 1250 watts total, Autometer Volt and Trans gauges with Lotek A-pillar, K&N Drop-in filter, WO Seat covers, Tint, NST WP pulley, Hi-lift jack, Diff breather mod, horn relocation mod, extra "D" rings, de-pinstriped, carrier bearing drop, Rear backup 886 bulbs, Camburg UCA's, AMW Catch can, BHLM, OME Dakars with AAL, Procomp 7089's, Front single hoop Demello bumper, Superwinch Tiger Shark 9500, Amsteel 3/8th synthetic line
    Looks badass! Glad you finally found the time to put the sliders on!
     
  16. May 21, 2009 at 12:05 PM
    #16
    Dark Knight

    Dark Knight Well-Known Member

    Joined:
    Jul 18, 2008
    Member:
    #8006
    Messages:
    9,594
    Gender:
    Male
    First Name:
    Jeff
    NC/SC
    Vehicle:
    4Runner Trail
    :thumbsup:
     
  17. May 21, 2009 at 12:07 PM
    #17
    Pster

    Pster Well-Known Member

    Joined:
    Jun 30, 2008
    Member:
    #7654
    Messages:
    2,745
    Gender:
    Male
    Charlotte, NC
    Vehicle:
    2006 Tacoma 4x4
    Bak Flip bed cover, shorty antenna, Peripheral iPod interface, Garmin 750 mount, add'l bed tie down rings, Westin nerf bars, hitch safe, tailgate lock, Ideal 1 3/4" turn-key clamp to secure tailgate from removal, Spare tire security cable, spare tire stainless air hose extender, Fumoto oil drain valve, Amp Research Bed X-Tender w/Schlage Cable Lock, bed mat, Redline hood struts
    What a Beast.
     
  18. May 21, 2009 at 12:10 PM
    #18
    DontPanic

    DontPanic Well-Known Member

    Joined:
    Feb 27, 2009
    Member:
    #14136
    Messages:
    59
    Gender:
    Male
    VA
    It always feels a little weird bolting the beefy rails to the much thinner gauge frame. I see they have not solved the washers binding/bending on the weld bead yet-had the same issue on my Xterra.
     
  19. May 21, 2009 at 12:13 PM
    #19
    luk8272

    luk8272 Poodoo

    Joined:
    Feb 24, 2008
    Member:
    #4929
    Messages:
    5,879
    Gender:
    Male
    First Name:
    Lucas
    Kaplan, Louisiana
    Vehicle:
    07 Silver4dr. 4x4, V6 Shortbed
    5% Tint, Bug flector, vent Visors, Removed secondary air filter, Rear Spring TSB w/ Wheeler's Add A Leaf HD Pack, Icon 2.0 rear shocks, Toytec 3" lift up front with Total Chaos UCA's, Debadged, Billet Grille,TRD Offroad rims/17x9 Pro comp 6001 rims, Duratracs 265/75/16 or 285/70/17, Fog light anytime mod, Tailgate hose clamp mod, Pro-dry AFE filter. Extended Differential Breather, ABS on/off, 6000k LEDs from CSJumper, heads/fogs, ScanguageII, Devil horns, Devil horns on third brake light, Mounted 60" Highlift, Mounted Tool Box, Wet Okole Front/Rear Seat Covers, TW sticker, Midland Handheld CB,Painted engine cover, Revenge Fab Sliders, ARE Topper, Weather tech Floorliners.
    That looks damn good. I was out back priming my sliders and trying to decide if I should paint them Glossy or semi. Perfect timing with your pics.
     
  20. May 21, 2009 at 12:38 PM
    #20
    Neubs

    Neubs [OP] Sold my Tacoma. Goodbye TW.

    Joined:
    Sep 13, 2008
    Member:
    #9194
    Messages:
    1,024
    Gender:
    Male
    Maryland
    Vehicle:
    06 TRD Offroad DC 4X4
    ToyTec 5100 Bilstein Adjustable Coilovers w/ Eibach Springs | OME Darkar Leaf Springs | 5150 10" Bilstein Rear Shocks| Light Racing UCAs | All Pro U-Bolt Flip Kit | Timbren Rear Bumps | Extended Stainless Steel Rear Brake Lines | ARB CKMA12 On-Board Air Compressor | Method 16" Race Wheels | Goodyear 285/70/16 MTR | 48" Hi-Lift Jack | ToyTec Diff Drop | Warn Hitch Shackle | TRD Cold Air Intake | PIAA Intense White Bulbs | PIAA Silicone Wipers | Toyota Bed Mat |Sockmonkey Graphics | 20% Tint | Sport Hood | Scan Gauge II & Blend Mount | Shrockworks Sliders | ARB Bumper | Warn M8000 Winch | Viking Synthetic Winch line | 12-Volt Guy In-Dash Winch Controller | Viking Delrin Rollers | Daystar Winch Isolator| ARB/IPF 900XS Lights | Weather Tech Liners | Rock Lights | Diff Breather Mod | Extra Bed D-Rings | Misc. LED bulbs throughout
    I agree 100% - It did feel weird. I was surprised and disappointed to find out how thin the frame metal was. At least the entire assembly will be a little stronger with the new addition.

    Thanks, these look to be semi gloss or maybe even a satin. I am considering adding some grip tape to the top. What do you think?

    Ha ha. Thanks. There are many others with trucks far superior to mine...:)
     
To Top