1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Shuddering + Clunk into 3rd gear. HELP.

Discussion in '2nd Gen. Tacomas (2005-2015)' started by machotaco2012, Feb 12, 2017.

  1. Feb 12, 2017 at 10:57 PM
    #1
    machotaco2012

    machotaco2012 [OP] Well-Known Member

    Joined:
    Jan 24, 2016
    Member:
    #175929
    Messages:
    60
    Gender:
    Male
    •3” front blocks •2” steel rear blocks •1.25" spidertrax spacers for clearance •285/70/17 (33's) Ko2's •20% tint
    Alright guys this is my last try before I just have to resort to Toyota. I have a 2012 prerunner. When it shifts into 3rd it kicks really hard. Its an automatic. I have checked the trans fluid. Also when driving around 35-40 at a steady speed or slightly accelerating it begins to shudder and I have to give it gas or let off to make it stop. My driveshaft is straight and I just got an alignment with new outer tie rod ends. Has anyone had either one of these problems? Also had my tires balanced recently. Thanks
     
  2. Feb 13, 2017 at 7:08 AM
    #2
    mightytacoman

    mightytacoman Mighty-known Member

    Joined:
    Apr 3, 2013
    Member:
    #101270
    Messages:
    2,411
    Gender:
    Male
    First Name:
    Kel
    Vehicle:
    4.5L 1grfe
    Brian Crower stroker kit, Carrillo pistons moly/ceramic coated, BC sportsman rods, arp s2000 head bolts, Darton M.I.D sleeves, Kelford race cams, Magnusson supercharger, hp tuner tuned, 650cc flow matched fuel injectors, CSF radiator, Walbro 255 fuel pump. pulleyboys quick change pulley with 2.3", fpr mod, NST crank, water and alternator pullies, 160° mishimoto thermostat. Puma On-board air, Radflo CDC ext coilovers with 14" 700# springs, extended length rear Radflo shocks with CDC, Dakar leak pack, Brute Force Fab front bumper galvanized and powder coated, DTRL mod, yellow fogs, fog anytime mod, relocated rear differential breather, synthetic fluids, custom airbox, tundra sized intake. 76mm throttle body, secondary air filter removed, Airflow snorkel, 4x innovation sliders powder coated, URD equal length headers, DT y-pipe, Aero-Turbine 2525xl exhaust dumped over axle, seat belt chime disabled, Warn 8000i winch, 1- 20" slim light bar in grill, 42" curved roof light both with custom brackets. Mesh grill, Brute Force Fab rear bumper with extra reverse lights, u bolt flip kit, SS extended brake lines, hockey puck bump stop extension, AT shackle flip kit, Light Racing UCA's, 4crawler 1.5" bodylift. custom built front and mid skid plates, re-geared to 4.56s, windows tinted 25%, Sony stereo, 8" skar sub-woofer, 1000 watt mono amp, retrofit headlights with legal demon eye, Kryptek Marathon seat covers. North Star agm 27f battery, Helo 791 rims, 315/75/r16 Mt/r ARB front air locker
    do a drain and fill if you havent. try these products. They work.
    https://www.amazon.com/Lubegard-19610-Tranny-Instant-Shudder/dp/B0002JMLQU

    https://www.amazon.com/Lubegard-630...coding=UTF8&psc=1&refRID=BJT5YADYBH34B6MFFV52
    Turning in the slu solenoid screw 1 full turn, not anymore increases pressure too and should help with lock up.
    if that doesnt do it, you're looking at a valve body upgrade to correct it.
    good luck.
     

Products Discussed in

To Top