Sleipnir's build and the typical BS thread

Sleipnir · Sep 6, 2017

rkarabao said: ↑

Thanks for your elaboration. The high heat factor in the enclosed housing is what I'm concerned about.
Click to expand...

Havent had a problem yet with heat and when I touch the lenses they are cool to the touch. I've had mine in for about a year now and no issues so far!

David Loflin · Sep 6, 2017

Sleipnir[OP] said: ↑

Hey David This is what I usually tell people when they ask me how I build everything:

Ok so far I found the section in my build thread that documents the build

https://www.tacomaworld.com/threads/sleipnirs-build-and-the-typical-bs-thread.435468/page-12

And here's the conversation I had with another member. Hope this helps! Let me know if you have questions

Glad you really like my headlights I actually got the idea from someone on facebook who was selling his for the same price. I didnt want to spend $900 on those headlights when I knew I could build them for half of that.

If I would have to choose light output that would be hard to say. The projectors from the anzo's were bright and had a very distinct line that separated the light from the dark. Like you would see in any retrofit. The Jeep headlights are amazing when its dark out and its just me on the road. When there is more lights like street lights or other cars its sometimes harder to see. I think a lot of that has to do with my inability to see light at night but who knows If I did end up building another set I would probably use @sidetracked . He's the one that has the Killer Deal on Rigid Lights thread. Morgan has a pair of DOT approved Jeep headlights that I would try out to see if they gave a better light direction.

The jeep headlights are super thin so you need to use a base to create a surface for them to stick to. I explain this in the next paragraph so dont stress There is no way for you to get screws or the stock bracket to work in the headlights and it would look really silly.

For the epoxy but I stole my trick from @TRSAndrew from the retrofit source. He uses JB Weld SteelStick to create a base for either projectors or these headlights to sit on. Once I had the Jeep headlight right where I wanted it I used JB Weld epoxy to make it permanent. This was probably the most scary part for me making these. You have to make sure these are exactly where you want them because the epoxy dries fast. One thing to mention which I didnt think of at the time is to make sure the reflector bowls are level so you can adjust the lights up or down. Mine were all the way down and when I put the Jeep headlights in as level I couldnt get them low enough to where I wanted them. I have only been flashed a couple times and one of them was from a cop

Other than that its pretty easy to make these. I did the BHLM but color matched them. I got everything I needed for materials at Autozone. And yes, you can put the headlights in the oven with the jeep headlights in and be ok with the wires. I followed the BHLM thread to open and seal them and I would highly recommend doing the same thing.

Oh and one last thing too. Since these draw so much power you will have your high beam light start to get brighter and brighter the longer these are on. It turns off when they cool down so its not permanent. Just make sure for longevity's sake turn them on when you need to to keep the LEDs safe since they are in an enclosed space and can get hot if not careful.

Let me know if you have any other questions or something doesnt make sense! If you need help feel free to hit me up!
Click to expand...

One last question, can I use the round, rigid/KC style jeep lights or would you say it's better to do these?

Sleipnir · Sep 6, 2017

David Loflin said: ↑

One last question, can I use the round, rigid/KC style jeep lights or would you say it's better to do these?
Click to expand...

Honestly, I am not sure. As long as it fits in the housing you should be ok but you may need an adapter to plug it into the headlight harness depending on the light. I know with the ones I got they plugged directly into the harness so I didnt have an issue. It's really about doing your homework, making sure they are LED's but dont get too hot and taking a shot in the dark

David Loflin · Sep 6, 2017

Sleipnir[OP] said: ↑

Honestly, I am not sure. As long as it fits in the housing you should be ok but you may need an adapter to plug it into the headlight harness depending on the light. I know with the ones I got they plugged directly into the harness so I didnt have an issue. It's really about doing your homework, making sure they are LED's but dont get too hot and taking a shot in the dark
Click to expand...

Yeah most of the ones I've looked at have been h4 so they fit harness wise, I guess as long as they are 7 inches it will work lol. I'll do my homework, thanks again man

Sleipnir · Sep 6, 2017

David Loflin said: ↑

Yeah most of the ones I've looked at have been h4 so they fit harness wise, I guess as long as they are 7 inches it will work lol. I'll do my homework, thanks again man
Click to expand...

Anytime! Just try to compare the lumens that I used vs the ones you want and maybe the LED itself. That might help you get an idea if the heat would be an issue.

Justyn98 · Mar 24, 2018

Sleipnir[OP] initial post: ↑

Hey all,

Figured I would start one of these since I have big plans for my Tacoma! I recently purchased a 2015 Barcelona Red AC Prerunner V6. I didn't really even mean to buy a Tacoma when I went onto the lot. I was actually hunting a Ford Taurus SHO but for some weird reason the Taco Gods wanted me to buy this truck instead.

Enough of the background story let's get into the current mods and future ones!

Current Mods:

Exterior:

17" Fuel Krank Wheels
285/70/R17 BFGoodrich KO2's
@CBoy808 custom bed decals
Custom made headlights I did
Anzo Taillights
@ChadsPride for supplying the @ACEkraut license plate bracket
Jumper LED switchback turn signals and LED Amber corner bulbs
@Shmellmopwho rear tail light brackets for pods and CB Antenna
High Lift Jack
$90 Craigslist Camper shell find

Armor:

Custom Sliders installed by @Texoma
Steel Craft Evo3 Rear Bumper

Suspension:

OME 886
Bilstein adjustable 5100 front and rear
@HeadStrong Off-Road progressive AAL
SPC LR UCA with greaseable ball joints (Thanks @Pirhett!!!)

Lighting:

@ragofabrication Hidden bumper brackets
@FreedomLEDBars 30" double row 5D bar and pods for fog lights
@ragofabrication foglight brackets
@BAMF behind the grille light bar mount with 20" FCK light bar
Thanks to

Maintenance:

Amsoil 5w-30 Signiture synthetic oil and filter (46,179)
Amsoil

$30 75W-90 Synthetic Gear Lube - 1 Quart (Pack of 2)

75W-90 Severe Gear Synthetic oil (46,179)

$8 Denso IKH20TT Iridium TT Spark Plug, (Pack of 1)

Denso IKH20TT Iridium TT Spark Plugs
Fran Cabin Air Filter

Interior:

Katzkin leather seats
Full LED interior kit
Cobra 29 LTD ST CB radio with 2' FS Firestick
RAM Mount A-pillar mod
@Iggy Switch Panel
Custom Sleeping Platform

Under the Hood:

@Iggy Bussman RTMR fuse panel and mounting plate
Slee Offroad

$323 CKMA12 On-Board Air Compressor High Performance 12 Volt for Air Locker Differentials and Tire Inflation

CKMA12 compressor bracket
CKMA12 Thanks @ramonortiz55 !!!
sPod 6 switch modular Thanks @fatfurious2 !!!

Performance:

Magnaflow muffler

Mods that need to be installed:

On the bench for now:

@ragofabrication Ditch light and extensions with FreedomLed pods and Bed Bars
Steelcraft Evo3 front bumper

Future Mods:

Aftermarket Steel bumpers
Better Bed Lights from @TacoStandCT !
Light bars for days!!!
Prinsu rack
Tepui tent
Coilovers and Dakar Pack
ECGS Third member with 4.88 gear and

$1,091 ARB RD129 Air Locking Differential

ARB RD129

Wish List:
http://sosoffroadconcepts.com/05-15-tacoma-rear-bumpers/

Mods for when the truck is paid off:
4x4 conversion

This is the thread I am going off of for the conversion. https://www.tacomaworld.com/threads/lucky-07-prerunner-to-4x4-conversion.311339/

How she sits now:

Some pics of my beauty!

Hey man I'm actually in the process of building those exact headlights! I just got done painting today and I'm going to touch up some spots tomorrow. The jeep lights should be here sometime next week and I'm using 3M window weld to bond the lens back on and then going around with silicone after I'm finished. my main questions are, am I going down the right route to avoid moisture and how did you get the jeep headlight to stay secured. I thought about using liquid nails to hold it.

The day I bought my truck!

I'll try to keep this up to date as best I can with progress! Just DM for questions or if I need to give updates!
Also on IG=@sleipnir_tacoma
Click to expand...

Sleipnir · Mar 24, 2018

>.>

Beretta4x4 · Apr 29, 2019

Sleipnir · Apr 29, 2019

Beretta4x4 said: ↑

Click to expand...

Sleipnir · Apr 29, 2019

Beretta4x4 said: ↑

Click to expand...

Check the FURD BURD

Beretta4x4 · Apr 29, 2019

Sleipnir[OP] said: ↑

Click to expand...

Log in or Sign up

Welcome to Tacoma World!

Sleipnir's build and the typical BS thread

#941
Sleipnir [OP] Still havent found that stupid snipe

#942
David Loflin 2012 Conversion

#943
Sleipnir [OP] Still havent found that stupid snipe

#944
David Loflin 2012 Conversion

#945
Sleipnir [OP] Still havent found that stupid snipe

#946
Justyn98 Well-Known Member

#947
Sleipnir [OP] Still havent found that stupid snipe

#948
Beretta4x4 What makes the green grass grow? TTC#0114

#949
Sleipnir [OP] Still havent found that stupid snipe

#950
Sleipnir [OP] Still havent found that stupid snipe

#951
Beretta4x4 What makes the green grass grow? TTC#0114

Products Discussed in

Log in or Sign up

Useful Searches

Welcome to Tacoma World!

Sleipnir's build and the typical BS thread

#941 Sleipnir [OP] Still havent found that stupid snipe

#942 David Loflin 2012 Conversion

#943 Sleipnir [OP] Still havent found that stupid snipe

#944 David Loflin 2012 Conversion

#945 Sleipnir [OP] Still havent found that stupid snipe

#946 Justyn98 Well-Known Member

#947 Sleipnir [OP] Still havent found that stupid snipe

#948 Beretta4x4 What makes the green grass grow? TTC#0114

#949 Sleipnir [OP] Still havent found that stupid snipe

#950 Sleipnir [OP] Still havent found that stupid snipe

#951 Beretta4x4 What makes the green grass grow? TTC#0114

Products Discussed in Entire Site Forum: 2nd Gen. Builds (2005-2015)

#941
Sleipnir [OP] Still havent found that stupid snipe

#942
David Loflin 2012 Conversion

#943
Sleipnir [OP] Still havent found that stupid snipe

#944
David Loflin 2012 Conversion

#945
Sleipnir [OP] Still havent found that stupid snipe

#946
Justyn98 Well-Known Member

#947
Sleipnir [OP] Still havent found that stupid snipe

#948
Beretta4x4 What makes the green grass grow? TTC#0114

#949
Sleipnir [OP] Still havent found that stupid snipe

#950
Sleipnir [OP] Still havent found that stupid snipe

#951
Beretta4x4 What makes the green grass grow? TTC#0114

Products Discussed in