SOLD BHLM TRD Sport $750 shipped lower 48

Changes in life so going back to OEM. Have a set of headlights that were off a 2018 TRD and I did the BHLM in March of 2019. Headlights have had Luminx on them since new, so lenses are in good shape. Luminx has a couple areas that have come up and a couple minor scratches (pictured). Used retrorubber to reseal and although it doesnt look perfect, it has been good and have no leaks and no broken tabs. Well over a thousand dollars in parts alone. Everything described accurately as possible below.

Halos - Diode Dynamics white halos and half the ring is cover with vinyl for the half circle look.
Diode Dynamics switchback DRL - All led's working and has been good and two new drivers.
Profile Hi-lens for extra high beam I put in high beam bucket and has radiance light that glows if you choose to connect.
Morimoto XB 35w ballasts
Osram D2S 5500k
All wiring, splitters, and anti flicker included for HID system.
RX350 projectors STiR lens tuned and etched with TRD logo
MESO double side marker with amber only strips - not switchback strips
VLED amber bulbs.

Below is accurate description of everything if you were to go over with a close eye.

Inside has couple spots from baking process on lens and on black, can't see it unless your looking real close (pictured)

Lenses have always been covered with Luminx, couple areas where it is not perfect (pictured)

Side markers has it appears a couple small led diodes out, again can't tell more than 2 feet away (pictured) wired so that they can also be used as turn signal (optional)

Two extra DRL connectors so that you can pre-wire if you want to that and just connect to truck and tap turn signal.

I had these wired so in the day the halos and DRL would be on with switchback signals.

At night it was the amber bucket, profile radiance light with no halos and no DRL.

Many options of how you can wire these since each component was wired to operate individually.

I wouldnt say these are plug and play and you would need to know how to hook up the HID system, how to tap the turn signal wire, how to manage the 3 wires on the DRL connector (100% - 50% - ground) to best hook it up. Also would need to splice or change connector on side marker and Amber bucket light (turn signal). I have included water resistant connecting ends to use.

I wired the Amber bucket light so it can be connected to the DRL connector if desired to have Amber on during day/night, or both. Also wired additional connector that will allow it to be used as an additional turn signal if wanted.

I have labeled every connector on the headlight to make it easier to understand.

$750 shipped lower 48. Will be 1 large box with headlights, wiring, and led drivers.

Overall headlight pictures

Picture of halos
Picture of white DRL lights

Picture of yellow switchback turn signals

Picture of side markers

Picture of Profile Hi-lens radiance light

Picture of VLEDS Amber led lights

Picture of HID wiring and oem DRL connector

Picture of scratches on Lumix, not deep enough to hit lens

Picture of Luminx coming up in couple of areas, not noticeable from 2 feet away

Picture of small leds out on side marker, again not noticeable from couple of feet, this is a very close up picture.

Picture of slight residue from baking process, again not noticeable a foot away, just trying to show everything.

 

Bump

 

Pmd

 

Bump

 

Price drop

 

Bump

 

To be honest, you may have better luck parting out the headlights due to the different defects; LEDs out, residue from baking, Luminix peeling up and also the half halos with TRD specific etching on the lenses it eliminates all the SR/SR5 owners.
If you decide to part these out I’d be interested in the VLED amber bulbs and maybe the MESO side markers, depending on price.

 

SOLD!