1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Sold: OEM Bed Cargo Divider w/ Hi-lift mount

Discussion in '3rd Gen Tacoma Parts Marketplace (2016-2023)' started by JFanaselle, Mar 29, 2021.

  1. Mar 29, 2021 at 11:48 AM
    #1
    JFanaselle

    JFanaselle [OP] Well-Known Member

    Joined:
    Oct 19, 2020
    Member:
    #344339
    Messages:
    660
    Gender:
    Male
    First Name:
    Joe
    Murrieta, CA
    Vehicle:
    2020 TRD Off-Road DCSB 4x4
    For sale is a Toyota OEM cargo divider for the bed. Will work with all 2nd or 3rd Gen models (long bed or short bed) that have the bed side utility tracks. It is incredibly stout, and is adjustable to wherever you'd like it within the bed. Great for holding groceries or recovery gear against the back wall near the cab or against the tailgate, or for mounting accessories and other gear inside the bed that can quickly be removed.

    The unit is in good condition, with a few marks and scratches from normal use. I also have a hi-lift brand 4XRac mount attached to it, so that you can attach a 48" hi-lift jack directly to the divider. I did cut off about 1 inch of material from one side of the extrusion where it attaches to the track mounts (see photos). This was done so that I could shift it slightly to one side of the bed, so that I could slide a long/slim piece of wood between it and the inner fender. By design, it slides back and forth inside those mounts, so you can either keep it centered where it belongs or you can slide it 1" to the side like I did. Doesn't impact the strength of mounting at all (they are intentionally designed to be a few inches wider than we need for our Tacoma beds, so that they can also be used on a Tundra).

    Looking for local sale only, as I don't have the means to pack it up for shipping. I'm located in the Temecula area of Southern California, and will gladly meet within about 30 minutes of driving in any direction. Asking $150 with the hi-lift mount, or $140 if you don't want the hi-lift mount.







     
  2. Mar 29, 2021 at 12:05 PM
    #2
    JFanaselle

    JFanaselle [OP] Well-Known Member

    Joined:
    Oct 19, 2020
    Member:
    #344339
    Messages:
    660
    Gender:
    Male
    First Name:
    Joe
    Murrieta, CA
    Vehicle:
    2020 TRD Off-Road DCSB 4x4
    Pending sale
     
  3. Mar 29, 2021 at 12:50 PM
    #3
    elmontemike

    elmontemike Well-Known Member

    Joined:
    Mar 2, 2017
    Member:
    #212154
    Messages:
    4,292
    Gender:
    Male
    First Name:
    Mike
    Dang. I’ll be in line if sale falls through
     
    JFanaselle[OP] and Norsemanvike like this.
  4. May 17, 2021 at 6:22 PM
    #4
    JFanaselle

    JFanaselle [OP] Well-Known Member

    Joined:
    Oct 19, 2020
    Member:
    #344339
    Messages:
    660
    Gender:
    Male
    First Name:
    Joe
    Murrieta, CA
    Vehicle:
    2020 TRD Off-Road DCSB 4x4
    Sold
     
    elmontemike likes this.

Products Discussed in

To Top