SOLD! SOS Rear Disc Brake Conversion with Parking Brake 1st Gen

would you happen to have part numbers for people interested in piecing a kit?

 

The critical part is the backing plates and park brake cables. Those you have to buy from SOS brakes. To buy those by them self you have to call them. Last I checked it was about $300. Then you could piece the rest together. It uses 2001-07 Seqouia for the rest of the pieces. You can buy the brackets for non parking brake cheaper. Here's the web page. https://sosperformance.com/t/rear-disc-brake-conversion-tu6

 

I did Datsun 240Z rear disc conversions back a few years ago and he might be onto something.If he would offer just the caliper hanger/bracket then you could source your own parts at the local pick a part.Looks like he is using all the 2005 Toyota Seqouia parts for the swap.So really all you need is the hanger/bracket.
You could do this way cheaper than what he has the kit priced at.$300.00 for the brackets alone is a wee bit to high,IMO.

 

Right on, thank you very much! For those that are considering this kit for the 1st gen Tacoma. From what I understand from someone else(can’t remember the forum/members name) that used this same kit. He mentioned it fits/ works. Only problem he had was with the supplied two brake cables(1 short/1 long) Just needed to swap out the short cable for another long one. Thanks once again Jonny nine fingers!

 

YW

$300 it close to what I remember. Could be less. That is for the setup with parking brake. The brackets without are quite a bit cheaper.