1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

some tips for python model 872 starter/alarm with pkall

Discussion in '2nd Gen. Tacomas (2005-2015)' started by Balien, Oct 13, 2011.

  1. Oct 13, 2011 at 12:21 AM
    #1
    Balien

    Balien [OP] Well-Known Member

    Joined:
    Jul 4, 2010
    Member:
    #39783
    Messages:
    81
    Gender:
    Male
    Central Canada
    Vehicle:
    TRD Tacoma auto, long box in red
    undercoating, lighted 4x4 switch, python alarm/starter, weather tech matts, bug and rock deflector, westin platinum nerf bars in black, kuda cell phone mount in matched grey.
    I just have to say I finally got my remote starter/alarm installed. it took two days of 8hrs each. Much harder than I expected because the stupid pkall didn't appear to program so I had to ring out all the wires ect just to find out it was working. It just doesn't flash when programmed like the manual states. I also forgot to ground pin h2/18 which is the neutral safety input(additional to neutral safety switch!!!!). I am glad I did this install because at least I know it wasn't butchered. I have seen many unhappy customers at best buy with broken interior pieces and intermittent starts and battery drain issues due to poor splices and careless installers with 2hrs to do the job. Also did the 4x4 switch mod which was a piece of cake. Don't forget you will need a relay for the second start wire.
     
  2. Oct 13, 2011 at 5:56 AM
    #2
    wayne73

    wayne73 Well-Known Member

    Joined:
    Dec 22, 2009
    Member:
    #27993
    Messages:
    113
    Gender:
    Male
    First Name:
    Wayne
    St. Paul, MN
    Vehicle:
    2009 Tacoma Sport 4x4
    Just installed my viper 5901 this last weekend, I used a Directed 556U and hid my valet key inside. These bypasses work very well, used for years.
     
  3. Oct 17, 2011 at 3:45 PM
    #3
    J-Rob #3

    J-Rob #3 Well-Known Member

    Joined:
    Mar 16, 2009
    Member:
    #14800
    Messages:
    178
    Gender:
    Male
    First Name:
    Josh
    North Carolina
    Vehicle:
    02 PreRunner TRD
    Toolbox Pioneer FH-8000BT HU Blue LED Dash Lights White LED Glove Box Aries Bull Bar Tinted Windows
    I just got my system today from the ups guy. I'm dreading this install. But I have an 02 Tacoma. And I can't find a really good write up on how to install.
     
  4. Oct 18, 2011 at 6:10 PM
    #4
    Balien

    Balien [OP] Well-Known Member

    Joined:
    Jul 4, 2010
    Member:
    #39783
    Messages:
    81
    Gender:
    Male
    Central Canada
    Vehicle:
    TRD Tacoma auto, long box in red
    undercoating, lighted 4x4 switch, python alarm/starter, weather tech matts, bug and rock deflector, westin platinum nerf bars in black, kuda cell phone mount in matched grey.
    To make things easier what I did was group the wires going to same places. Ie ignition switch, door harness ect. And labeled them with colors they are going too and basic description. Heat shrink or tape over first foot of each branch and cap off spares with heat shrink. Also pre-connected all relays and immobilizer wires. If you do this right you won't even need the connection diagram while you are installing your system.
     
  5. Oct 18, 2011 at 10:46 PM
    #5
    Balien

    Balien [OP] Well-Known Member

    Joined:
    Jul 4, 2010
    Member:
    #39783
    Messages:
    81
    Gender:
    Male
    Central Canada
    Vehicle:
    TRD Tacoma auto, long box in red
    undercoating, lighted 4x4 switch, python alarm/starter, weather tech matts, bug and rock deflector, westin platinum nerf bars in black, kuda cell phone mount in matched grey.
    DIRECTWIRE™ WIRING INFORMATION - TOYOTA / TACOMA / 2002 / Remote Start


    12volts white & white/red + ignition harness
    Starter black + ignition harness
    Second Starter N/A
    Ignition black/red + ignition harness
    Second Ignition black/yellow + ignition harness
    Third Ignition N/A
    Accessory blue/red + ignition harness
    Second Accessory N/A
    Keysense lt. green/red - ignition harness
    Power Lock gray - front of fuse box, 22 pin plug
    Notes: These wires will test only by operating the key in the passenger door lock cylinder, not the rocker switch on the door.
    Power Unlock purple - front of fuse box, 22 pin plug
    Notes: These wires will test only by operating the key in the passenger door lock cylinder, not the rocker switch on the door.
    Lock Motor blue/white 5wi DKP, 12 pin plug in pin 10
    Unlock Motor blue 5wi DKP, 12 pin plug in pin 11
    Parking Lights+ green + back of fuse box, 12 pin plug
    Parking Lights- purple/red - front of fuse box, 22 pin plug
    Hazards same as turn signals
    Turn Signal(L) green + steering column
    Turn Signal(R) green/white + steering column
    Reverse Light red/black + under driver seat, 13 pin plug
    Door Trigger - front of fuse box, 22 pin plug
    Notes: The driver door trigger is green, the front passenger door trigger is green/white, and the rear door trigger is yellow/green. Use all three wires and diode isolate each.
    Dome Supervision comes on with unlock
    Trunk/Hatch Pin N/A
    Hood Pin N/A
    Trunk/Hatch Release N/A
    Power Sliding Door N/A
    Factory Alarm Arm N/A
    Factory Alarm Disarm N/A
    Disarm No Unlock N/A
    Tachometer lt. green/black ac instrument cluster or
    Notes: On the 4 cyl it is at the data link connector to the right of the steering column. On the V6 it is at the igniter on the passenger fender, below the air filter box.
    Wait to start N/A
    Brake Wire green/white + brake pedal switch
    Parking Brake green/white - parking brake switch
    Horn Trigger green/red - steering column
    Memory Seat 1 N/A
    Memory Seat 2 N/A
    Memory Seat 3 N/A
    Interface Module: Category:
    Immobilizer Bypass Required:
    No Type:
    N/A
    Part #: N/A
    Notes:




    This wiring information is being provided free of charge on an "as is" basis, without any representation or warranty. It is your responsibility to verify any circuit before interfacing with it using a digital multimeter.
    Directed electronics, Inc. assumes no responsibility with regards to the accuracy or currency of this information. Proper installation in every case is and remains the responsibility of the installer. DEI assumes no liability or responsibility resulting from improper installation, even in reliance upon this information.
     
To Top