Sonar quick set up

SENSITIVITY: Set the amount of power 87% in deep water (25ft+) and 60% in shallow water (less than 25ft.)

AUTO SENSITIVITY: Leave it on until you find your own preference.

COLORLINE: 77% is preferred but set it to your preference.

GRAY LINE: Set it at 55%.

DEPTH RANGE: set to your choice so you can “SEE” the bottom on a FULL screen.

AUTO DEPTH RANGE: This locks the unit so the bottom is always on the screen.

CHART SPEED: Set to maximum.

SURFACE CLUTTER: Leave it at 0%.

DEPTH CURSOR: Sets up a line across the screen for exact depths of targets

PING SPEED: 75%

FISH ID: OFF!

UNITS OF MEASURE: Feet/Fahrenheit

SET KEEL OFFSET: Leave it at 0

 

The new units of today can be a pain but once you get dialed in you should see a bunch of this, took me awhile to get dialed in but once I got there it was nice to see what was under the boat. Just added a new down scan up front 2 days ago, I'm excited to get on the water Tuesday and get that unit dialed in.

 

Time to drop shot