South Carolina BS thread under new MANAGEMENT and lives in SC

I taped the fenders and made a marking gauge with a paint stir stick and a nail. Helped me to keep the 1 inch line tight, neat, and wrinkle free. Polish exposed metal with some abrasives and I used some door trim stuff that you can buy at the auto parts store. The adhesive is lacking in those things, so I used some Goop to glue it to the fenders. It's been over 8 years and its just starting to separate from the fender and of course, I'm out of state for a while, so it'll be a bit before I can get to fix it. I think I have a link to a write up I did. Lemme see if I cant track it down.

Edit: Here you go.

-J

 

Really starting to also consider getting a 4Runner V8. I like to simplicity of the Toyota interior vs the GX, but I do like the luxury of the GX. Both are priced high right now, with the 4Runner slightly higher in some cases. Which seems stupid. Of course buying a used car right now isn't a good idea as all are priced higher because of Covid.

 

I love my 08 V8 runner

 

URE Sept 25-27! Make it happen!

 

Or they'll have to bail last minute, which is cool too! #lifehappens

 

4th gen 4runners are pretty nice. We had a 5th gen with manual t-case (2011) and it got over 20mpg average and 24mpg on road trips with factory 265/70-17 tires. Ran my BFG ATs load range E 265/70-17 and MPG dropped to about 20 highway. I did a lot of trips to Atlanta in the T4R. Sunroof open, AC off, back window half to 3/4th of the way down, cruise control at 55mph and you can pull almost 30mpg on stock tires. Ours had the Eco-mode or whatever that green leaf witchcraft was.

 

Did you consider just getting a trailer for the Runner?

 

Buy a trailer haha

 

I'll try

 

Good lord lol. I don’t need metal cut, just plastic lol

GX is still cheaper than the T4R overall and they all are V8’s.

 

True.

I still have a truck. My 2001 Chevy SilveRAYdo.

 

fify

 

Thanks Eric!

 

Once you start cutting, you cant stop cutting.

-J

 

A 2018? Too rich for my blood.

 

I am listening!

 

This is a true statement!
@PlumpPossum you ready to start on yours next ?

 

@JustAddMud did you ever make fender Liners after cutting fenders ? I cut out tabs on my metal fenders to give me something to attach a liner, just haven’t got around to making them yet. I need to do that sooner than later.

 

Years ago this City hosted the PanAm games. The event leased a fleet of Trucks, all white, all fully loaded for the event with take over payments or purchase outright options after the event. Went out to the landfill site one Saturday Mornin’ & counted over 20 event trucks all with trailers & nothin’ in the boxes haulin’ trash, tree branches & what have you. Sure could tell who was keepin’ their Trucks.