speed sensor

Hello out there
2005 base Tacoma automatic trans A340E. OBD has 2 codes 0500 vss A. I changed the input and output sensors to no avail, I tested the existing sensors with ohm meter and got a reading of .645 so they are not shorted. Transmission shifts fine but cruise control doesn't work and check engine light is on. Anyone have any thoughts

 

Do a search. The diagnostic cost to verify a faulty cluster can get expensive.
A p0500 for me was a bad instrument cluster. Dealer does not have a replacement, so you would either have to get it rebuilt or get a salvage one.

 

More information on the P0500 code can be found here.

https://www.tacomaworld.com/threads/2nd-gen-information-diagnostics.784008/#post-28042157

We have found a workaround/bypass if the cluster is bad.

https://www.tacomaworld.com/threads/clear-a-single-code-to-pass-inspection.802680/#post-28889532