1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

STLharry Build v2.0

Discussion in '1st Gen. Builds (1995-2004)' started by STLharry, Oct 10, 2010.

  1. Oct 10, 2010 at 8:00 AM
    #1
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Hello and welcome! Read as much or as little as you want, but here's the build on the STLharry Truck.

    Parts list (As Built)
    Looks
    '95.5-'97 Style front end, tailgate decal, and tail lights
    Sockmonkey 'Yeti Rescue' decals
    Too many stickers to count

    Armour
    ARB front bumper/bar
    Rock sliders (NHOR Fab)
    Rear tube bumper (NHOR Fab)

    Suspension
    King Coilovers (OEM style, set at ~2.5" lift)
    OME Dakar springs
    OME N85 shocks
    OME hardware
    NWOR greaseable shackles/spring pins
    Dif Drop kit
    Brake proportioning plate

    Power/Drivetrain
    Deckplate mod

    Wheels
    Goodyear Duratrac 265/75/16
    Wheeler's Offroad 16" Type B Steelies

    OBA
    ARB CKMA12 12V Compressor
    Viair 90-120PSI pressure switch
    Exterior air hookup
    Air kit (chucks, impact wrench, fittings, hose, etc)

    Lighting
    IPF rectangular H4 lenses
    IPF 968DCG 100W aux lights

    Work
    Vanguard Ladder rack
    Tool box

    Accesories
    Jeraco camper shell from an older pickup




    This is how it started:

    The new one had a few problems, like a crunchy clutch release bearing, rock sliders not cut to the correct width (stuck out too far), and the billet grille (not a fan).

    First day back in VT with the truck:
    [​IMG]

    First thing first...The truck needed a front end swap. The write-up for that is here.

    Quality finish:
    [​IMG]

    The next part I don't have pictures for, but essentially I swapped the truck's suspensions, putting OME (with new springs) into this one and putting the old stock stuff back into the old truck. A toolbox was also painted black and added to the truck. Here is the truck after the swap:
    [​IMG]


    The rest of the modifications are in posts lower down.
     
    Last edited: Mar 26, 2014
  2. Oct 10, 2010 at 8:03 AM
    #2
    Jason'sLawnCare

    Jason'sLawnCare Prepared for Bambi

    Joined:
    Apr 12, 2009
    Member:
    #15878
    Messages:
    12,375
    Gender:
    Male
    First Name:
    Jason
    Jacksonville Florida
    Vehicle:
    08 4x4 Double Cab TRD Rugged Trail
    CBI Moab 2.0, CBI Trail Rider 2.0, CBI sliders w/kickout, Superwinch EPi9.0S, OME sport shocks w/886 coils, OME n182, 1.5" aal, JasonBuilt 3/16th full belly skid, BuiltRight uca, Body Mount Chop, 285/75/16 km2's, Rear cat delete, exhaust crossover rerouted, Fog light anytime, Locker mod, Rear leaf tsb, Debadged, Uws Tool Box, Electric Exhaust Cutout, AFE Pro Dry S, Kiwi Wifi, Diff Breather Relocated, Grom Ipod Adapter, Dual Diehard platinum batteries isolated by BlueSea marine switch
    I'm a little confused. You put the older front end on the 01? Just trying to figure it out.

    I love that bumper. Especially on first gens.
     
  3. Oct 10, 2010 at 8:16 AM
    #3
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Hah yup. I like it more, plus I had that hideous billet grille to remove...
     
  4. Oct 10, 2010 at 8:18 AM
    #4
    Jason'sLawnCare

    Jason'sLawnCare Prepared for Bambi

    Joined:
    Apr 12, 2009
    Member:
    #15878
    Messages:
    12,375
    Gender:
    Male
    First Name:
    Jason
    Jacksonville Florida
    Vehicle:
    08 4x4 Double Cab TRD Rugged Trail
    CBI Moab 2.0, CBI Trail Rider 2.0, CBI sliders w/kickout, Superwinch EPi9.0S, OME sport shocks w/886 coils, OME n182, 1.5" aal, JasonBuilt 3/16th full belly skid, BuiltRight uca, Body Mount Chop, 285/75/16 km2's, Rear cat delete, exhaust crossover rerouted, Fog light anytime, Locker mod, Rear leaf tsb, Debadged, Uws Tool Box, Electric Exhaust Cutout, AFE Pro Dry S, Kiwi Wifi, Diff Breather Relocated, Grom Ipod Adapter, Dual Diehard platinum batteries isolated by BlueSea marine switch
    To be honest, I think I like the older one more to. Looks more like the pickup that I've spent so many hours drooling over in back to the future.
     
  5. Nov 10, 2010 at 5:48 AM
    #5
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    More recent shot...with my friend/roommate's Prelude.
    [​IMG]
     
  6. Nov 10, 2010 at 6:55 AM
    #6
    Jason'sLawnCare

    Jason'sLawnCare Prepared for Bambi

    Joined:
    Apr 12, 2009
    Member:
    #15878
    Messages:
    12,375
    Gender:
    Male
    First Name:
    Jason
    Jacksonville Florida
    Vehicle:
    08 4x4 Double Cab TRD Rugged Trail
    CBI Moab 2.0, CBI Trail Rider 2.0, CBI sliders w/kickout, Superwinch EPi9.0S, OME sport shocks w/886 coils, OME n182, 1.5" aal, JasonBuilt 3/16th full belly skid, BuiltRight uca, Body Mount Chop, 285/75/16 km2's, Rear cat delete, exhaust crossover rerouted, Fog light anytime, Locker mod, Rear leaf tsb, Debadged, Uws Tool Box, Electric Exhaust Cutout, AFE Pro Dry S, Kiwi Wifi, Diff Breather Relocated, Grom Ipod Adapter, Dual Diehard platinum batteries isolated by BlueSea marine switch
    I'm diggin the white
     
  7. Nov 11, 2010 at 7:54 AM
    #7
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Today:
    [​IMG][​IMG]
     
  8. Apr 15, 2011 at 8:26 PM
    #8
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Recent pictures:
    Hi-Lift mounted:
    [​IMG]

    Side views:
    [​IMG][​IMG]

    CB:
    [​IMG]

    Switch Panel:
    [​IMG]

    Also removed the sway bar.

    Cheers.
     
  9. Oct 19, 2011 at 6:16 PM
    #9
    01Tac0ma

    01Tac0ma Bash Fabriction & Off-Road

    Joined:
    Jun 11, 2010
    Member:
    #38782
    Messages:
    6,169
    Gender:
    Male
    First Name:
    Chad
    West Columbia, SC
    Vehicle:
    SAS 01 TRD 4x4
    Look at build!
    Nice build, im diggin the new"er" body style with the original tacoma front end!
     
  10. Dec 8, 2011 at 12:24 PM
    #10
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Inclinometer/clock installed

    [​IMG]
     
  11. Jun 5, 2012 at 3:37 AM
    #11
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Additions in the past month:
    -New Vanguard rack
    -Tail lights from a 96
    -Anchor chain across front shackles
    -Old rear bumper installed
    -QLD, AU and VT strong plates

    [​IMG]

    [​IMG]
     
  12. Jun 5, 2012 at 8:45 AM
    #12
    Madjik_Man

    Madjik_Man The Rembrandt of Rattle Can

    Joined:
    Dec 2, 2009
    Member:
    #26893
    Messages:
    10,524
    Gender:
    Male
    Boulder, CO
    Vehicle:
    1998 Ext Cab 4x4 TRD 5MT sunfire red pearl
    About 25 pounds of spray paint and vinyl dye
    Man, Vermont is getting all grown up looking.

    When I lived there it was so quaint.
     
  13. Jun 7, 2012 at 6:17 PM
    #13
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Yeah, we have a lot of development around the Burlington area. That's at a bLowe's obviously.
     
  14. Sep 6, 2012 at 9:58 AM
    #14
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Picture from the summer of the truck with all rappelling gear and machines:
    [​IMG]
     
  15. Sep 21, 2012 at 8:47 AM
    #15
    DblCabMN

    DblCabMN Well-Known Member

    Joined:
    Mar 22, 2011
    Member:
    #53498
    Messages:
    689
    Gender:
    Male
    Mpls, Minnesota
    Vehicle:
    03 DC TRD/LTD
    Bilstein 5100's all around - Toytec/Eibach 112-620 Coils, Wheelers 5-Pack+Wheelers 2"AAL. 33x10.5x15 KM2s - Siped on Summit Racing 84-5883 rims with 3.750 BS. 4.88s. Demello HD round sliders. Home built full skids. Home built front bumper. Plasti'd badges. Energy Susp. steering rack bushings. Sway bar delete. Deck plate mod. aFe Pro-Dry. Gibson exhaust.
    Can i get more info on your rear bumper? Tried searching for NHOR Fabrications etc. and am coming up dry...
     
  16. Sep 30, 2012 at 5:58 PM
    #16
    Ecnerwal

    Ecnerwal Well-Known Member

    Joined:
    Jul 20, 2012
    Member:
    #83039
    Messages:
    121
    Gender:
    Male
    NW Mass
    Vehicle:
    '02 4x4 2.7 A/T Ext Cab
    gradually replacing the bumper with hairy bondo ;-)
    'dija try the NHOR Fabrication link in STLharry's signature?
     
  17. Sep 30, 2012 at 7:32 PM
    #17
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    It's my friend's little shop. What sort of questions did you have?
     
  18. Sep 30, 2012 at 8:19 PM
    #18
    buzzard1992

    buzzard1992 Yep

    Joined:
    Sep 16, 2010
    Member:
    #43343
    Messages:
    2,417
    Gender:
    Male
    First Name:
    Alex
    Summerville, SC
    Vehicle:
    01 4wd trd, 255/85/16 km2s
    5100's with eibachs. And 255/85/16 km2s
    Love those early model grilles. Good lookin truck
     
  19. Sep 30, 2012 at 8:34 PM
    #19
    DblCabMN

    DblCabMN Well-Known Member

    Joined:
    Mar 22, 2011
    Member:
    #53498
    Messages:
    689
    Gender:
    Male
    Mpls, Minnesota
    Vehicle:
    03 DC TRD/LTD
    Bilstein 5100's all around - Toytec/Eibach 112-620 Coils, Wheelers 5-Pack+Wheelers 2"AAL. 33x10.5x15 KM2s - Siped on Summit Racing 84-5883 rims with 3.750 BS. 4.88s. Demello HD round sliders. Home built full skids. Home built front bumper. Plasti'd badges. Energy Susp. steering rack bushings. Sway bar delete. Deck plate mod. aFe Pro-Dry. Gibson exhaust.

    Now why would I do that :)

    Skipped straight to the TW search ft. then on to Google. Oi.

    I just dig the bumper, it's like TG's but low-pro which is what i'm looking for.

    Does he have any plans to make more? and/or can you post pics of any more angles of it?
     
  20. Oct 3, 2012 at 6:55 PM
    #20
    STLharry

    STLharry [OP] Lube: It's the key to penetration.

    Joined:
    Oct 11, 2008
    Member:
    #9899
    Messages:
    1,849
    Gender:
    Male
    First Name:
    Harry
    VT
    Vehicle:
    Yeti Rescue Package with 220k miles
    '95-'97 camouflaged, ARB bull bar, sliders, rear tube bumper, King coilovers with Icon neoprene condoms and a defenestrated sway bar, OME Rear Suspension: CS046R leafs/N85 shocks/NWOR greasable mounting stuff; S13WL Tundra calipers/pads/rotors, IPF H4 lenses and bulbs, IPF 968 DCG 100W fog lights, clapped out CB radio, Aussie-spec FJ60 inclinometer, ARB CKMA12 compressor; 4' Hi-Lift, deckplate mod/grey wire mod/dif breather extensions/dif drop, Duratrac tires, Sockmonkey bedside decals, boat cupholder
    Hmm...he and I made that thing 3.5 years ago but I can ask him for sure. As for the site I asked him and he hasn't exactly updated it in a while. I guess his fab work is on hold for the time being. But we designed it and he made it pretty much on the fly so I'm sure he could do it again.
     
To Top