Stock lug nut socket

I have a 2005 and everytime I go to remove lug nuts I struggle with the socket getting stuck on the nut. Is there a specific socket I should be using? What does everyone else use and are you having problems? Thanks

 

do your nuts have the chrome cap on them, if so, this is your problem I would replace them with ones without that cap over the lug nut

 

And it’s 21mm

 

Capri Tools Impact Flip Socket Set, Lug Nut Service, Includes 17, 19, 21mm Metric Sizes and 3/413/16, 7/8 SAE Sizes (CP58102)

Amazon.com: Capri Tools Impact Flip Socket Set, Lug Nut Service, Includes 17, 19, 21mm Metric Sizes and 3/4,13/16, 7/8 SAE Sizes (CP58102) : Tools & Home Improvement

one of these is awesome. used a cornwell version with a cordless impact all the time as a tech. now i keep the above kit in my truck for the occasional person with a flat i come across on the road side. and 21mm, unless youve some aftermarket lugs or something specal

 

Are you using an impact? Those can cause the chromed nut cover to swell up over time.

 

As stated above, the chrome cap is getting deformed and swelling up from corrosion or repeated hits with an air gun. Replace the lug nuts

 

They make a 21.5mm socket
I bought one after this post…….
https://www.tacomaworld.com/threads/i-got-a-case-of-the-swollen-nuts.686539/