Suspension wanders

Hey all

I replaced upper and lower ball joints, inner and outer tie rods, got an alignment about 2yrs ago. 1 year after I bought a new set of Yokohama Geolanders.

My suspension was really good prior to having to replace the ball joints and now my steering doesn't seem quite as tight and as I mentioned in the title, it tends to wander a little bit and causes me to over correct constantly.

Could this be an issue with my steering rack or maybe after I replace my struts and shocks it will help???

 

It sounds like you might have a bad alignment with not enough caster, which will cause tramlining where the truck follows ruts and grooves much easier.

 

Check steering rack bushings while someone turns the wheel side to side.

 

Forgot to mention I did not use EOM parts. Thought the deal I got on the TRQ set was decent from Partsgeek

 

Unfortunately I don't have anyone to help me. I don't believe I have caster bolts installed which might be the problem. I will double check