Taco Outlaw’s 2nd Gen garage sale

As I am cleaning out parts and extra gear will post up. Plenty more to come and some nice goodies in a few months.


Prefer local on any heavy or large items but anything is available to ship if you want to pay for shipping.

SOLD
ADD catch can. Picked up off a member but never installed
Stock LCA
Entune JBL Nav HU w/XM module- no cables
Bullaculla tow relocate the mount
TRD AFE Intake Cover. New never mounted.
Low Range Offroad - rear locker cover
CH4x4 front locker switch new
4x4 mud flaps no hardware
New BAMF Hangars and Shackles
Sumo bump stops and low range Offroad flip kit.
OEM rotors
OME Dakar leaf pack with 29XL leaf added
Front MGM bumper with crash bar, fog lights
TRD Front Brake Pads - PTR09-8911 (2x Sets)
King +2 LT TC Spec Coilovers less than 1500 miles
stock TRD Offroad Suspension.UCA,TRD Billys,Stock 4x4 Leaf Pack w/U bolts and bracket
Stock skids
TC Gusseted Spindles by liquidtorch
Pelfrey Full Hoop steel bumper
BAMF - Bumper Reinforcement Brackets
31M Northstar AGM Battery
Pelfrey fuse panel

Pending Sale
Front and Rear Diffs - @jdiola

FOR SALE NOW

Engine/Exhaust
DT Shorty Headers 2012-2015 - New never mounted $500
$30 4Runner Fan shroud New. Picked up for a CSF swap but ended up getting the Tacoma version


Electrical

$150 - Rago Fab Battery cage for AGM 31 Battery

Armor
$50 - Warn Fairlead New
$300 - BAMF IFS skid - one dent, if you can believe it, but still a tank)

Suspension

Mid Travel Setup



$600 - TC UCA - Standard non-LT


$1700- TC Race LCA dual shock - non LT (Preference to the person who buys the bypasses/shocks). It will come with modified lower steering stops so you don't have to do it.


$1700 - King TC spec Front Ext travel coilovers with Adjusters (Recently Revalved for bypasses and rebuilt with only a few thousand miles on them) (15 compression/15 rebound). I tossed a used set of 700lb springs on. I have a 650lb set like new and a new set of 700lb springs. The buyer can choose one for $100. Current springs work fine but are not the prettiest.


$1000 - King TC spec 2 tube bypass (standard valving). One may need a seal replaced (it happened when swapping some oil out when I replaced a bypass adjuster, and it is either wrong or bad). Minor fix only has a few thousand miles on them. The tire rubbed on the adjuster and came loose. They are in the photo above and will post a better one later on.

Preference goes to the buyer of the coilovers and bypasses

$800 - King Rear w/ Adjusters (non-ext but can be modified and spacer removed to be EXT version). Shafts have some pitting, lower cap on one clipped u bolt flip kit. It can be replaced but never had issues. Needs a refresh.

$100 - Shock towers for 12” relocate. They picked up off another member, but another used them.




$100 - Total Chaos Cam Tab Gussets - NEW

Free - stock swaybar has one bent end link but the bar itself is fine.


Free - OEM shackles



Other Interior Items

$100 - Rear Double Cab storage cubbies


$350 - DFG Offroad Snomaster 56D slide and tilt fridge slide. Brand new but missing straps and mounting screws. Never used.



$150 - Entune plus HU also has an extra XM module but possibly no cable.


$50 ($70 shipped to most places) - set of Rokblocks XL mud flaps, no hardware (I may find it, but I'm sure you get replacements front and rear included. About $35 for parts


$200 Full Double Cab Carpet Floor (replaced mine with the all-weather floor).

Other Random Items

$350 firm (already discounted for TW) - Pelican 0450 case - Tool chest ( I have several available ) with slide-out drawers. Currently have inserts for aircraft mechanics but can be replaced to your liking or no inserts. These things are badass and take a beating, are waterproof, and even float if needed for some time.

I prefer not to ship these but I could probably slap a label on the case. I do not have any boxes big enough to ship them. There is an extra $15 charge to ship no box. (at least so far, all have been shipped with no box, and UPS added a service fee due to that)




$150 New- N-FAB bumper light bar mount w/tabs and w/ license plate mount. No hardware or instructions (if I find it I’ll include but should be easy to get). Mounts some Baja LP or XLs or similar to a stock bumper.


$60 New - BAMF behind the grill light bar bracket


$50 rear swing-out tire mount powder coated. Came from a Bruteforce swingout but could likely use it for anything.


$50 Pop & Lock bought off a member and never installed it. - used



$20 hi lift mounts for a bed rail. Needs T-slots.


$100 OBO - Rear chrome offroad bumper with Tow Hitch (no lights on the license plate) Has a small ding on it. Local pickup only - will post a pic later

$50 - Tacoma Axles Shafts (not complete, just the shafts

 

Potential Items for sale in coming months.

Coming up:

Drivetrain

• Front Clamshell Diff in 4.56 w/ Harrop E-Locker and solid spacer from ECGS
• Rear E-Locker - 3rd Member Diff in 4.56 with solid spacer Freshly built by ECGS earlier this year.

Both have been maintained with Lucas 85/140 Dino Oil per recommendations from ECGS.

No Donor Diff is needed here. $2900

Local Pickup is Preferred due to shipping these things. Possible with extra cost.

Both have been maintained with Lucas 85/140 Dino Oil per recommendations from ECGS.

Suspension

Armor

• BAMF 80" Sliders bolt-on - Will eventually switch to welded.
• BAMF Diff Skid. Great shape, a new coat of paint to spruce it up. $300.

Considering selling

• BNIB BAMF Gastank skid $250

Wheels

• SCS Ray10 17x9 -38 x5 - TBD as I may need to change my wheel setup after suspension changes
• 315/70/17 BFG KM3 x5 - I likely won't but toyed with the idea of swapping wheels and tires if I make a change. If so prefer a package deal.

Other

• Wilwood Aero6-DS 6 piston Calipers w/ RR Racing adapters (Fits 5th Gen T4R rotors 338x32) - I May hold on to these though
• DBA 4000 338x32 Rotors (Pair) - $300
• Brand New Prinsu GX470 Full Rack $900

 

Reserved for more stuff

 

Reserved for more goods

 

Oh snap!

 

Pm sent for mudflaps more specifically the rokblox

 

@nudavinci64 ill take the LCAs!

 

When they come off we can chat. =)

 

man I too also want to chat on that...

 

Damn, I love the toolbox and fridge slide. Hmmmmmmmm...

EDIT: Fridge slide won't work for me, damn. However, I do love the tool boxes.

 

I got toolboxes!

 

Well, we have been talking about the setups for ages. You may have to get some historical preference or you and Eddie @SUMOTNK can have a dual. ha.

 

damn, id take those leafs if you werent in CA. im in GA

 

Lol I hear that..

How do you feel about putting that oil catch can in a flat rate box and shipping it to 37920?

 

Following.....

 

Would you ship those leafs?

 

That works for me. Should be small enough to squeeze in one.

 

Anything is possible. Not sure how much it would be but could be shipped.

 

Yeah, idk how much they weigh but I may be interested. At that price they are about the same as an AAL

 

Added a few more things