Taco PRO Owners: Interested in a spring upgrade for front?

Looks awesome! I hope my setup looks like that after I get the front springs, and wheels and tires installed! I like the slight rake you have

 

Anyone considered pairing this with an Icon RTX spring?

 

That's what I'm doing. Will be installing end of the month.

 

I'll wait

 

I just got the Eibach springs installed on my Pro that has a Victory 4x4 bumper with Warn winch. I had dropped about an inch in the front with that weight but the Eibach springs got that inch back. The truck is now completely level. I'll try to get some pics in next day or two if anyone cares to see the difference.

On another note, my 4x4 shop guy said that I should be able to accommodate 285/75 without much difficulty. Considering that but may end up just going with some Nitto Ridge Grapplers at 265/75 which should take it up a little over an inch all around.

 

Not RXT but I did Icon Add-A-Leaf + the Eibach springs. I was planning to go RXT but I'll wait until i need new shocks and get full suspension upgrade to go that route..

 

Has anyone used this method to measure their stock rear height with an empty bed? I forgot to measure it before I installed the AAL. Just wondering what the starting number is. Thanks!

 

Its going to vary from truck to truck. Depending on how many miles the truck has on it, if its been loaded most of its life, and general offroad use.

 

Don't forget about how much gas is in the tank

 

I figured people would provide such details after they do their measurements. I have been taking my measurements with a full tank and with weight in the bed (~250lbs).

 

Just go to a dealer and take a measurement yourself bro

 

FYI,
Eibach just canceled my 2020 Pro Lift order that I placed in May from the site glitch.

Was told they have the wire for springs but they are on the schedule until October. Blocks are pushed back to like December if buying package.

 

Same here, guess us 2020 folks are back in the holding pattern.

 

Boooo

I was hoping to get them sooner for an event in October.

 

They keep backing it up, I may end up with a Westcott kit soon.

 

I caved on the Westcott a while back. I'm still planning to get these springs when they're eventually released tho.

If you're as impatient as me it's totally worth it. Trucks drives great with this kit.

 

What bumper is that?

 

https://c4fabrication.com/collections/tacoma-2016/products/tacoma-hybrid-front-bumper-3rd-gen-2016

 

Me three, but a quick call to Eibach sorted it out. Call 951-256-8300 and follow the phone tree prompts (name lookup by first name) and speak with Tanner, he was very helpful. Stuff won’t get here any sooner but the part number still exists so you can get your order turned back on.

 

Thanks, I talked to Tanner and he was super helpful. Hopefully our 2020 springs will be shipping in the fall...