1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

TacoTunes Access cab kit screws?

Discussion in 'Audio & Video' started by voltron75, May 23, 2008.

  1. May 23, 2008 at 2:56 PM
    #1
    voltron75

    voltron75 [OP] Member

    Joined:
    Mar 16, 2008
    Member:
    #5330
    Messages:
    22
    SoCal
    Vehicle:
    08 PreRunner TRD Access Cab
    I was about to order the access cab kit f6x9 r6.5 from TacoTunes. I've read on some threads that they package the incorrect sized screws/bolts for the rear mounts. Does anyone know if they corrected that yet? Has anyone order a kit from them recently?
     
  2. May 23, 2008 at 3:27 PM
    #2
    ChibbMD

    ChibbMD Well-Known Member

    Joined:
    Mar 27, 2008
    Member:
    #5567
    Messages:
    107
    Gender:
    Male
    Dallas, TX
    Vehicle:
    08 PreRunner Double Cab
    Even better question is simply what size bolts and washers could you buy from the hardware store? Anyone know? I'm about to install new speakers and I'm going to find out one way or the other. Just thought it would be nice to get it right the first time. Thanks.
     
  3. May 23, 2008 at 3:38 PM
    #3
    voltron75

    voltron75 [OP] Member

    Joined:
    Mar 16, 2008
    Member:
    #5330
    Messages:
    22
    SoCal
    Vehicle:
    08 PreRunner TRD Access Cab
    My thoughts exactly, I'm probably still going to buy the kit, but if it's known that they still send the wrong bolts, then I can go to homedepot and get the correct ones beforehand, so I don't have to make a run with the door panels off.
     
  4. May 23, 2008 at 4:24 PM
    #4
    chris4x4

    chris4x4 With sufficient thrust, pigs fly just fine. Moderator

    Joined:
    May 8, 2008
    Member:
    #6497
    Messages:
    106,132
    Gender:
    Male
    First Name:
    FlimFlubberJAM
    Tenoe, AZ
    Vehicle:
    2013 Rubicon Unlimited,
    4.10 gears, sliders, and lots of buttons.
    Best thing to do would be to take one of the existing screws out and bring it to an Ace Hardware (or equivelant) and match it there. I have done this in the past with good results. :)
     
To Top