1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Tampa Bay Area Tacomas BS Thread

Discussion in 'Florida' started by Taco No Baka, Feb 9, 2013.

Page 147 of 453
  1. Nov 3, 2015 at 7:25 PM
    #2921
    Taco No Baka

    #2921
    Taco No Baka [OP] Interco Tire Snob

    Joined:
    May 9, 2013
    Member:
    #103866
    Messages:
    8,434
    First Name:
    Lee
    Tampa, FL
    Vehicle:
    1998 SR5 Xtra Cab 4WD V6 Spartan Package
    OME 3" lift with Dakar rear leaves and 883 front coils. 36x12.50 Super Swamper TSL/SXs on Pro Comp Series 97 15x8 Steelies, Bud Built Front Skid, 4xI rock sliders, 4.88s and an Eaton True Trac LSD up front, 4.88s and a Detroit Locker in the rear, LED cab clearance lights, Sway Bar Delete, Rear Diff Breather Mod, Autometer Monster Tach, Cobra 25LTD Classic, Roof-mounted 3' Firestik Firefly, Garmin GPS, HiLift Jack, Flush-mount LED pod lights in rear bumper, 28" light bar in the front bumper, rear shock relocation (Ruff Stuff brackets), u-bolt flip with Ruff Stuff Anti-wrap perches, CBI rear frame reinforcements, 10" travel Bilstein 5125 rear shocks, heavy duty front crossmember made by Allenfab, Rear shock mounts/crossmember (for upper mounts), spring perches, frame plates, and front crossmember welded in by Allenfab, CBI Ditch Light Brackets, Ditch Light Pods. AllenFab Custom Hybrid front bumper and recovery points. Drivetrain lifted 2" in conjunction with a 2" BL. Modified Trail Gear transmission crossmember/skid. Warn Xeon 10K winch. Large left side body mod.
    Haha, if Thorny Mike ever gets a locker, he's not going to be nearly as much fun to watch. :D

    @michaelrussell :cool:
     
    Taco No Baka, Nov 3, 2015
    #2921
    Timbo's Customs[QUOTED] likes this.
  2. Nov 3, 2015 at 7:27 PM
    #2922
    Timbo's Customs

    #2922
    Timbo's Customs Well-Known Member

    Joined:
    Aug 8, 2013
    Member:
    #110078
    Messages:
    7,266
    Gender:
    Male
    First Name:
    Timothy
    Lakeland FL
    Vehicle:
    2019 f250 6”lift 37s deleted 1997 T4r, tons and 4ds
    1997 t4r has super duty axles, 5.13s locked front and rear. 3 link front with 14" kings. Rear 63s.
    I told him at citrus that I need to follow him so I can see the crazy stuff
     
    Timbo's Customs, Nov 3, 2015
    #2922
    Taco No Baka[OP] likes this.
  3. Nov 3, 2015 at 7:34 PM
    #2923
    Rattletrap66

    #2923
    Rattletrap66 (ノಠ益ಠ)ノ彡┻━┻

    Joined:
    Aug 25, 2014
    Member:
    #136901
    Messages:
    23,784
    Gender:
    Male
    First Name:
    Frank
    Tampa, FL ☜(ﾟヮﾟ☜)
    Vehicle:
    2014 TRD Off Road DCSB
    ╭∩╮(ಠ۝ಠ)╭∩╮
    I know lol we talked about it when I posted the video
     
    Rattletrap66, Nov 3, 2015
    #2923
    Timbo's Customs[QUOTED] likes this.
  4. Nov 3, 2015 at 7:42 PM
    #2924
    Timbo's Customs

    #2924
    Timbo's Customs Well-Known Member

    Joined:
    Aug 8, 2013
    Member:
    #110078
    Messages:
    7,266
    Gender:
    Male
    First Name:
    Timothy
    Lakeland FL
    Vehicle:
    2019 f250 6”lift 37s deleted 1997 T4r, tons and 4ds
    1997 t4r has super duty axles, 5.13s locked front and rear. 3 link front with 14" kings. Rear 63s.
    That crs is a bad thing
     
    Timbo's Customs, Nov 3, 2015
    #2924
    Taco No Baka[OP] likes this.
  5. Nov 4, 2015 at 5:49 AM
    #2925
    michaelrussell

    #2925
    michaelrussell Well-Known Member

    Joined:
    Feb 2, 2013
    Member:
    #96717
    Messages:
    3,052
    Gender:
    Male
    First Name:
    Michael
    belleview,FL
    Vehicle:
    09 prerunner sr5 2.7 / 5 speed
    lots of stuff done more to do
    michaelrussell, Nov 4, 2015
    #2925
    Timbo's Customs and Taco No Baka[OP] like this.
  6. Nov 4, 2015 at 5:58 AM
    #2926
    Taco No Baka

    #2926
    Taco No Baka [OP] Interco Tire Snob

    Joined:
    May 9, 2013
    Member:
    #103866
    Messages:
    8,434
    First Name:
    Lee
    Tampa, FL
    Vehicle:
    1998 SR5 Xtra Cab 4WD V6 Spartan Package
    OME 3" lift with Dakar rear leaves and 883 front coils. 36x12.50 Super Swamper TSL/SXs on Pro Comp Series 97 15x8 Steelies, Bud Built Front Skid, 4xI rock sliders, 4.88s and an Eaton True Trac LSD up front, 4.88s and a Detroit Locker in the rear, LED cab clearance lights, Sway Bar Delete, Rear Diff Breather Mod, Autometer Monster Tach, Cobra 25LTD Classic, Roof-mounted 3' Firestik Firefly, Garmin GPS, HiLift Jack, Flush-mount LED pod lights in rear bumper, 28" light bar in the front bumper, rear shock relocation (Ruff Stuff brackets), u-bolt flip with Ruff Stuff Anti-wrap perches, CBI rear frame reinforcements, 10" travel Bilstein 5125 rear shocks, heavy duty front crossmember made by Allenfab, Rear shock mounts/crossmember (for upper mounts), spring perches, frame plates, and front crossmember welded in by Allenfab, CBI Ditch Light Brackets, Ditch Light Pods. AllenFab Custom Hybrid front bumper and recovery points. Drivetrain lifted 2" in conjunction with a 2" BL. Modified Trail Gear transmission crossmember/skid. Warn Xeon 10K winch. Large left side body mod.
    I dunno if it'd be necessary though. I was crawling those washouts on 11 and 14 in 2WD. Don't see why you wouldn't be able to with a low enough gear and a locker. But, hey, by all means, entertain us. :D
     
    Taco No Baka, Nov 4, 2015
    #2926
  7. Nov 4, 2015 at 2:04 PM
    #2927
    SR52012

    #2927
    SR52012 Well-Known Member

    Joined:
    Dec 10, 2012
    Member:
    #92798
    Messages:
    553
    Gender:
    Male
    First Name:
    Mike
    Port Richey (Tampa Area)
    Vehicle:
    2012 Taco Pre-Runner SR5 3" procomp lift
    3" Procomp lift level kit N-FAB step sides
    What up Tampa peeps? Its been a while since i have been in here. A lot has been going on.... short list, had a baby ( almost 10 months old now), got outsourced to a company in india, got hired as a contractor for the indian company, and now looking for a job because my contract is almost up...

    So hi, how are u, anyone hiring? lol
     
    SR52012, Nov 4, 2015
    #2927
  8. Nov 4, 2015 at 2:05 PM
    #2928
    Rattletrap66

    #2928
    Rattletrap66 (ノಠ益ಠ)ノ彡┻━┻

    Joined:
    Aug 25, 2014
    Member:
    #136901
    Messages:
    23,784
    Gender:
    Male
    First Name:
    Frank
    Tampa, FL ☜(ﾟヮﾟ☜)
    Vehicle:
    2014 TRD Off Road DCSB
    ╭∩╮(ಠ۝ಠ)╭∩╮
    :wave:
    what type of work are you looking for
     
    Rattletrap66, Nov 4, 2015
    #2928
  9. Nov 4, 2015 at 2:07 PM
    #2929
    SR52012

    #2929
    SR52012 Well-Known Member

    Joined:
    Dec 10, 2012
    Member:
    #92798
    Messages:
    553
    Gender:
    Male
    First Name:
    Mike
    Port Richey (Tampa Area)
    Vehicle:
    2012 Taco Pre-Runner SR5 3" procomp lift
    3" Procomp lift level kit N-FAB step sides
    I am a looking for pretty much anything with benefits. Im going to be going back to school to get me real estate license. My job was in IT as a Computer Operator.
     
    SR52012, Nov 4, 2015
    #2929
  10. Nov 4, 2015 at 2:13 PM
    #2930
    SpruceTaco

    #2930
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    d238dd3e4686db59e88cb98b7c253fb6_49e6e2ff6e16ba52bf6859ba614dfe8a9316615f.jpg
    Damn we just hired another IT guy at work.
     
    Last edited: Nov 4, 2015
    SpruceTaco, Nov 4, 2015
    #2930
  11. Nov 4, 2015 at 2:15 PM
    #2931
    SR52012

    #2931
    SR52012 Well-Known Member

    Joined:
    Dec 10, 2012
    Member:
    #92798
    Messages:
    553
    Gender:
    Male
    First Name:
    Mike
    Port Richey (Tampa Area)
    Vehicle:
    2012 Taco Pre-Runner SR5 3" procomp lift
    3" Procomp lift level kit N-FAB step sides

    Where was that?
     
    SR52012, Nov 4, 2015
    #2931
  12. Nov 4, 2015 at 2:16 PM
    #2932
    SpruceTaco

    #2932
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    J.C. Newman Cigar Company over in Ybor city.
     
    SpruceTaco, Nov 4, 2015
    #2932
  13. Nov 4, 2015 at 2:51 PM
    #2933
    Taco No Baka

    #2933
    Taco No Baka [OP] Interco Tire Snob

    Joined:
    May 9, 2013
    Member:
    #103866
    Messages:
    8,434
    First Name:
    Lee
    Tampa, FL
    Vehicle:
    1998 SR5 Xtra Cab 4WD V6 Spartan Package
    OME 3" lift with Dakar rear leaves and 883 front coils. 36x12.50 Super Swamper TSL/SXs on Pro Comp Series 97 15x8 Steelies, Bud Built Front Skid, 4xI rock sliders, 4.88s and an Eaton True Trac LSD up front, 4.88s and a Detroit Locker in the rear, LED cab clearance lights, Sway Bar Delete, Rear Diff Breather Mod, Autometer Monster Tach, Cobra 25LTD Classic, Roof-mounted 3' Firestik Firefly, Garmin GPS, HiLift Jack, Flush-mount LED pod lights in rear bumper, 28" light bar in the front bumper, rear shock relocation (Ruff Stuff brackets), u-bolt flip with Ruff Stuff Anti-wrap perches, CBI rear frame reinforcements, 10" travel Bilstein 5125 rear shocks, heavy duty front crossmember made by Allenfab, Rear shock mounts/crossmember (for upper mounts), spring perches, frame plates, and front crossmember welded in by Allenfab, CBI Ditch Light Brackets, Ditch Light Pods. AllenFab Custom Hybrid front bumper and recovery points. Drivetrain lifted 2" in conjunction with a 2" BL. Modified Trail Gear transmission crossmember/skid. Warn Xeon 10K winch. Large left side body mod.
    Taco No Baka, Nov 4, 2015
    #2933
  14. Nov 4, 2015 at 3:00 PM
    #2934
    SpruceTaco

    #2934
    SpruceTaco トヨタ

    Joined:
    May 18, 2012
    Member:
    #79082
    Messages:
    12,271
    Gender:
    Male
    First Name:
    Mike
    Clearwater, FL
    Vehicle:
    2012 Spruce Mica TRD Sport
    Tinted windows 5%, sill protectors, TRD stubby antenna, weathertech in channel rain guards, wheathertech floor mats, BHLM, Truxedo low pro qt, DTRL deleted, anytime backup camera, bed storage locks, fog lights on anytime, tailgate theft deterrent, painted engine cover, relocated horns, l.e.d bed lights, l.e.d engine bay lights, l.e.d lights above cup holders, in glove box, rear cup holder, in console storage & cubby next to steering wheel, Grillcraft grill, 17x8.5 SCS Ray10's, 35x12.50 Nitto Ridge Grapplers, Borla cat back exhaust, map & dome l.e.d's, TEQ badge on grill, Redline tuning hood struts, Maxtrac spindles, SPC Light Racing UCA's, Bilstein 5100's front set at 0 with OME 885's & extended length Bilstein 5100's in the rear, All Pro expedition leaf springs & 2" blocks, extended brake lines front & rear, 1.5" 4crawler drive shaft spacer, Beefed Taco carrier bearing drop, 1.25" spidertrax wheel spacers on rear, Kenwood DNX570 touchscreen with navigation, 30" led light bar in lower bumper opening, 1/4" top plate spacer drivers side, Bullet Proof Fabricating skid plate, Cali Raised ditch lights & Rago f Fabrication brackets, Amp Research power steps, smoked l.e.d 3rd brake light, Wet Okole seat covers, under cab LED'S tied to dome circuit
    SpruceTaco, Nov 4, 2015
    #2934
  15. Nov 4, 2015 at 3:02 PM
    #2935
    Taco No Baka

    #2935
    Taco No Baka [OP] Interco Tire Snob

    Joined:
    May 9, 2013
    Member:
    #103866
    Messages:
    8,434
    First Name:
    Lee
    Tampa, FL
    Vehicle:
    1998 SR5 Xtra Cab 4WD V6 Spartan Package
    OME 3" lift with Dakar rear leaves and 883 front coils. 36x12.50 Super Swamper TSL/SXs on Pro Comp Series 97 15x8 Steelies, Bud Built Front Skid, 4xI rock sliders, 4.88s and an Eaton True Trac LSD up front, 4.88s and a Detroit Locker in the rear, LED cab clearance lights, Sway Bar Delete, Rear Diff Breather Mod, Autometer Monster Tach, Cobra 25LTD Classic, Roof-mounted 3' Firestik Firefly, Garmin GPS, HiLift Jack, Flush-mount LED pod lights in rear bumper, 28" light bar in the front bumper, rear shock relocation (Ruff Stuff brackets), u-bolt flip with Ruff Stuff Anti-wrap perches, CBI rear frame reinforcements, 10" travel Bilstein 5125 rear shocks, heavy duty front crossmember made by Allenfab, Rear shock mounts/crossmember (for upper mounts), spring perches, frame plates, and front crossmember welded in by Allenfab, CBI Ditch Light Brackets, Ditch Light Pods. AllenFab Custom Hybrid front bumper and recovery points. Drivetrain lifted 2" in conjunction with a 2" BL. Modified Trail Gear transmission crossmember/skid. Warn Xeon 10K winch. Large left side body mod.
    :pout:
     
    Taco No Baka, Nov 4, 2015
    #2935
  16. Nov 4, 2015 at 5:42 PM
    #2936
    Timbo's Customs

    #2936
    Timbo's Customs Well-Known Member

    Joined:
    Aug 8, 2013
    Member:
    #110078
    Messages:
    7,266
    Gender:
    Male
    First Name:
    Timothy
    Lakeland FL
    Vehicle:
    2019 f250 6”lift 37s deleted 1997 T4r, tons and 4ds
    1997 t4r has super duty axles, 5.13s locked front and rear. 3 link front with 14" kings. Rear 63s.
    I can donate some time helping doing the repairs
     
    Timbo's Customs, Nov 4, 2015
    #2936
  17. Nov 4, 2015 at 5:56 PM
    #2937
    Taco No Baka

    #2937
    Taco No Baka [OP] Interco Tire Snob

    Joined:
    May 9, 2013
    Member:
    #103866
    Messages:
    8,434
    First Name:
    Lee
    Tampa, FL
    Vehicle:
    1998 SR5 Xtra Cab 4WD V6 Spartan Package
    OME 3" lift with Dakar rear leaves and 883 front coils. 36x12.50 Super Swamper TSL/SXs on Pro Comp Series 97 15x8 Steelies, Bud Built Front Skid, 4xI rock sliders, 4.88s and an Eaton True Trac LSD up front, 4.88s and a Detroit Locker in the rear, LED cab clearance lights, Sway Bar Delete, Rear Diff Breather Mod, Autometer Monster Tach, Cobra 25LTD Classic, Roof-mounted 3' Firestik Firefly, Garmin GPS, HiLift Jack, Flush-mount LED pod lights in rear bumper, 28" light bar in the front bumper, rear shock relocation (Ruff Stuff brackets), u-bolt flip with Ruff Stuff Anti-wrap perches, CBI rear frame reinforcements, 10" travel Bilstein 5125 rear shocks, heavy duty front crossmember made by Allenfab, Rear shock mounts/crossmember (for upper mounts), spring perches, frame plates, and front crossmember welded in by Allenfab, CBI Ditch Light Brackets, Ditch Light Pods. AllenFab Custom Hybrid front bumper and recovery points. Drivetrain lifted 2" in conjunction with a 2" BL. Modified Trail Gear transmission crossmember/skid. Warn Xeon 10K winch. Large left side body mod.
    Cool! I might take you up on that at some point when I'm ready to do my u-bolt flip. :D

    I'm probably going to doom myself by saying this since the job is only half done, but the steering rack bushings are coming along a lot easier than I was led to believe they would. It took me about 45 minutes this morning to get the rack loose and remove the old bushings. It was easy-peezy. Of course, now I have to get the new poly bushings the mailman dropped off today installed and the rack bolted back up...then it will be time to start on the inner tie rods. Then she's going to sit for a while until I get the new wheel bearing and seal(s) and have the machine shop press them in. (I kinda miss the old nasty conical wheel bearings you had to pack with grease but could install with basic tools. :()
     
    Taco No Baka, Nov 4, 2015
    #2937
    Timbo's Customs[QUOTED] likes this.
  18. Nov 4, 2015 at 6:02 PM
    #2938
    Timbo's Customs

    #2938
    Timbo's Customs Well-Known Member

    Joined:
    Aug 8, 2013
    Member:
    #110078
    Messages:
    7,266
    Gender:
    Male
    First Name:
    Timothy
    Lakeland FL
    Vehicle:
    2019 f250 6”lift 37s deleted 1997 T4r, tons and 4ds
    1997 t4r has super duty axles, 5.13s locked front and rear. 3 link front with 14" kings. Rear 63s.
    U bolt flip is easy. Just have to get the top plate and u bolts. Would take maybe 45 minutes
     
    Timbo's Customs, Nov 4, 2015
    #2938
  19. Nov 4, 2015 at 6:04 PM
    #2939
    Taco No Baka

    #2939
    Taco No Baka [OP] Interco Tire Snob

    Joined:
    May 9, 2013
    Member:
    #103866
    Messages:
    8,434
    First Name:
    Lee
    Tampa, FL
    Vehicle:
    1998 SR5 Xtra Cab 4WD V6 Spartan Package
    OME 3" lift with Dakar rear leaves and 883 front coils. 36x12.50 Super Swamper TSL/SXs on Pro Comp Series 97 15x8 Steelies, Bud Built Front Skid, 4xI rock sliders, 4.88s and an Eaton True Trac LSD up front, 4.88s and a Detroit Locker in the rear, LED cab clearance lights, Sway Bar Delete, Rear Diff Breather Mod, Autometer Monster Tach, Cobra 25LTD Classic, Roof-mounted 3' Firestik Firefly, Garmin GPS, HiLift Jack, Flush-mount LED pod lights in rear bumper, 28" light bar in the front bumper, rear shock relocation (Ruff Stuff brackets), u-bolt flip with Ruff Stuff Anti-wrap perches, CBI rear frame reinforcements, 10" travel Bilstein 5125 rear shocks, heavy duty front crossmember made by Allenfab, Rear shock mounts/crossmember (for upper mounts), spring perches, frame plates, and front crossmember welded in by Allenfab, CBI Ditch Light Brackets, Ditch Light Pods. AllenFab Custom Hybrid front bumper and recovery points. Drivetrain lifted 2" in conjunction with a 2" BL. Modified Trail Gear transmission crossmember/skid. Warn Xeon 10K winch. Large left side body mod.
    On a 1st Gen, you have to weld new shock mounts onto the axle. 1st Gen Shock mounts are integral to the bottom plate which gets deleted in the flip. ;)
     
    Taco No Baka, Nov 4, 2015
    #2939
    Timbo's Customs[QUOTED] likes this.
  20. Nov 4, 2015 at 6:12 PM
    #2940
    Timbo's Customs

    #2940
    Timbo's Customs Well-Known Member

    Joined:
    Aug 8, 2013
    Member:
    #110078
    Messages:
    7,266
    Gender:
    Male
    First Name:
    Timothy
    Lakeland FL
    Vehicle:
    2019 f250 6”lift 37s deleted 1997 T4r, tons and 4ds
    1997 t4r has super duty axles, 5.13s locked front and rear. 3 link front with 14" kings. Rear 63s.
    Ah ok. We'll just have to get a Lower shock mount and do it up
     
    Timbo's Customs, Nov 4, 2015
    #2940
    Taco No Baka[OP] likes this.
Page 147 of 453
To Top