The Insane Asylum DCLB build and XJ insanity

I think you’re right.

 

Make him do a 63 swap for you. The leafs I have will hold up all the weight you have on your truck with ease!

 

I watched those HH take an absolute beating when we broke off I was quite impressed I thought for sure they would bend or get messed up eventually but didn't seem to even flinch. At one point he came down on the PS one and was resting on it with the wheel still in the air. Pretty impressive.

 

I’d like to, but Randy told me no.

 

Overrated! Just gas it! Btw I found the beer!

 

Yea they seem pretty stout.

 

It all depends on how committed you are. It takes some finagling and time but in the end I am extremely happy with the outcome. Going the 63 swap isn't for the faint at heart it takes commitment and some $$$ you can do it on the super cheap but to me that makes too many compromises. Mine cost me after everything was said and done a little over 3g. There is quite a bit to it that just snowballs.

The HH would be good too. With your weight I'd suggest stepping into some Deaver Expeditions, Dobinsons, or the ones the other Joe sells unless you have one of those already. From what I've seen they just hold up a lot better than Dakars or the Allpoos. You are spending a bit more though. My old Deavers really did well at carrying weight and they live on carrying even more than I would on a daily basis still going strong. I've seen @Blackout14 springs in action on a few rigs with great success as well. If you go with the 2.0 shock like Randy it'll be easier to clear and not have to worry too much with wheel choice.

 

Figures. BTW if you run 2 different sliders that would be epic

 

IKR!!! Just got to talk the twin into it on the opposite sides!

 

Almost like new!!!!



One down! 3 to go!

 

You rang?

 

Swap your driver side slider for a mob town let’s run different sliders on each side!!!! All...



Style!

 

Fuck it just cut all your armor down the middle and weld SOS and Mobtown on one side and the other be more like

Style!

 

Hahahahahahaa



















NO!

But maybe!

 

I just got a mobtown rear cam relocation bracket to mount on my SOS rear bumper.

Does that count?

 

It’s about to if you cut it in half!

 

I gotta figure out how to cleanly run the wiring. I don’t want to zip tie wires to the swingout. I may drill holes and run the wiring inside the lower bar.

That’ll be my weekend project.

 

like the 24hr trail 12 from 3 years ago.

 

Exactly but not that much water thankfully

 

Resubbing for the gender reveal party. Congratulations again you crazy bastard!

PS Skipper party for 3 pretty soon.