1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

The RCTOY inspired TECHOMA

Discussion in '1st Gen. Builds (1995-2004)' started by rctoy, Jun 10, 2014.

  1. Jun 18, 2014 at 3:19 PM
    #41
    Robby655

    Robby655 Well-Known Member

    Joined:
    Jan 25, 2013
    Member:
    #96089
    Messages:
    440
    Gender:
    Male
    First Name:
    Rob
    Phoenix AZ
    Vehicle:
    02' Pre... getting there!
    7069 procomp, indash dvd, kicker 10', kicker amp mounted behind backseat, spray in bedliner, Cree LED headlights, 20 in. Lightbar on bumper, 5100's, Eibachs, ToyTec AAL, Gorilla lug nuts, shorty antenna, LED reverse bulbs, hella black magic 500s, tube bumper, bedrack w/ fiskars x27 axe, shovel, hi lift, allpro 1.5' spacers, allpro rear bumper, allpro 80" sliders, JBA Catback Exhaust, Deck Plate Mod
    I dig that tool box :) nice storage! the one drawback to a bedrack... accessiing the bed can be a royal PITA
     
  2. Jun 18, 2014 at 3:21 PM
    #42
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..

    bought that tool box out of a full size and cut it down to fit after i did that the guy wanted to buy it back. guess he found out what they sell for new :eek::eek: $1300
     
  3. Jun 18, 2014 at 6:42 PM
    #43
    Robby655

    Robby655 Well-Known Member

    Joined:
    Jan 25, 2013
    Member:
    #96089
    Messages:
    440
    Gender:
    Male
    First Name:
    Rob
    Phoenix AZ
    Vehicle:
    02' Pre... getting there!
    7069 procomp, indash dvd, kicker 10', kicker amp mounted behind backseat, spray in bedliner, Cree LED headlights, 20 in. Lightbar on bumper, 5100's, Eibachs, ToyTec AAL, Gorilla lug nuts, shorty antenna, LED reverse bulbs, hella black magic 500s, tube bumper, bedrack w/ fiskars x27 axe, shovel, hi lift, allpro 1.5' spacers, allpro rear bumper, allpro 80" sliders, JBA Catback Exhaust, Deck Plate Mod
    haha he was dreaming thinking you were gunna sell it back, I know I sure as hell wouldnt! nice find :cool:
     
  4. Jun 18, 2014 at 8:32 PM
    #44
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    He was pissed cuz I had already cut 22 inches out of it fits my tacoma like a glove
     
  5. Jun 18, 2014 at 8:44 PM
    #45
    timmytoast

    timmytoast Card-Carrying Illuminati Member

    Joined:
    Dec 27, 2013
    Member:
    #119279
    Messages:
    3,696
    Gender:
    Male
    Prison City, CA
    Vehicle:
    2013 SR5 4x4
    Black Plastiderp Front Emblem and Grille Surround, Relocated Horns, Bed Mat w/ bolt mod, Precision Fit seat covers, Anytime Fog Light Mod, Console and Glove Box Organizers, DIY Washable Cabin Air Filter, Pop N Lock Tailgate Latch, K B Voodoo Bed Brackets
    You should've sold it back to him for more $ since you "customized" it :cool:
     
  6. Jun 19, 2014 at 7:05 AM
    #46
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    I think he was hopping i would just sell it back to him and he could advertise it for what it is and get more money out of it. as soon as he saw it in the back of my truck though he was not a happy person. Like i said his problem not mine cuz im happy as hell..
     
  7. Jun 20, 2014 at 7:14 PM
    #47
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    AAAAHHHHHHHH feck looks like they don't make a 8" lift spring for the 1500 biggest they do is 5".. So now im debating running a long travel leaf pack but not going spring under it's the same price as the deaver 6" 63's

    Either way the price is now close to $900 for rear springs.. So much for that being the cheap end of the truck.. Guess I could order the 5" springs and just block the rest of it like I have now though I was hopping to not go that route.
     
  8. Jun 20, 2014 at 7:54 PM
    #48
    IDtrucks

    IDtrucks Just out for a rip are ya bud?

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    20,039
    Gender:
    Male
    First Name:
    Mark
    Boise ID
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    what happened to 10" lift springs with pulled leaves?

    I would be interested to see what an LT leaf pack looks like over axle on that set up
     
  9. Jun 20, 2014 at 11:01 PM
    #49
    Smar969905

    Smar969905 ToyotaLover

    Joined:
    Feb 28, 2012
    Member:
    #73827
    Messages:
    3,757
    Gender:
    Male
    First Name:
    Zach
    Deer Park, WA
    Vehicle:
    11, 2.7l, 5mt, tow pkg, 4x4
    Tow Package, LCA BAMF skids, custom pin striping courtesy of trees, custom bumper indent from another tree
    What about stacked springs, 3" and 6" but with different coil rates, sort of like progressive springs to lower a car.
     
  10. Jun 21, 2014 at 8:03 PM
    #50
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    I figured 8" would be plenty but looks like 6" is the biggest I can get. Should still do the trick just fine and im going to build another track bar like I had before so if I have to blocks will work just fine. Probably going to run a 6"shackle as well.
     
  11. Jun 21, 2014 at 8:06 PM
    #51
    Bennett707

    Bennett707 Yeti Hunter

    Joined:
    Apr 28, 2012
    Member:
    #77793
    Messages:
    11,409
    Gender:
    Male
    Oregon
    Vehicle:
    '04 V6 3.4 TRD
    zip ties and scotch tape (duct tape is too expensive)
    I like where this thread is going.
    Also easy to fap too.
     
  12. Jun 22, 2014 at 6:59 AM
    #52
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    got some frame plate work done yesterday but spend a decent amount of time welding on the flying crawler..
     
  13. Jun 22, 2014 at 7:38 AM
    #53
    IDtrucks

    IDtrucks Just out for a rip are ya bud?

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    20,039
    Gender:
    Male
    First Name:
    Mark
    Boise ID
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    On that note, tell me they look better than Rocky's used 38s
    Taking up more shop time I see
     
  14. Jun 22, 2014 at 8:08 AM
    #54
    BradyT88

    BradyT88 Well-Known Member

    Joined:
    Nov 3, 2011
    Member:
    #66419
    Messages:
    36,796
    Gender:
    Male
    Idaho
    :woot: we're almost done welding on that thing!:)
     
  15. Jun 22, 2014 at 6:29 PM
    #55
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    yeah much better hopping to get them mounted next week and post a pic or two of them.

    told you id help you just didn't say how long it would take. past you no one else is getting shop time. mine all mine..
     
  16. Jun 23, 2014 at 1:06 PM
    #56
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Sold tires over the weekend and got some TW members together for lunch Here we are one day later and 18" coil overs are ordered along with break lines for the front of the truck.. i think the only thing left to order for the front is my PSC taco pump kit.
     
  17. Jun 23, 2014 at 6:01 PM
    #57
    IDtrucks

    IDtrucks Just out for a rip are ya bud?

    Joined:
    Jun 2, 2010
    Member:
    #38254
    Messages:
    20,039
    Gender:
    Male
    First Name:
    Mark
    Boise ID
    Vehicle:
    96' X-Cab 4x4 TRD Off Road Clusterfuck
    JVC Deck, 10" sub mountd in rear seat cubby, 2 LED off road lights mounted in grille, amber raptor style grille lights, LED rock lights, square led bed light, custom made fuse block tray, 12 blade Blue Sea fuse block, 100a marine circuit breaker, black plasti dipped full grille, tinted tail lights + third, Uniden 520 with 4' firestik, Bilstein 5100s with 620lb Eibach coils, Diff drop, Chevy 63 leaf swap, TG creeper joints, 14" triangulated biletein 5125s, 8" extended steel braided brake line, TG Rock Sliders, CBI Moab 1.0 front bumper, custom fabbed bed rack, full TRD E-Locker axle swap and matching re-gear with custom stand alone wiring circuit, 29 spline pinion flange from an 06 wishbone runner, tubbed for 35x12.5" general grabbers on Ultra type 181 wheels, crush sleeve eliminator, Mini ARB compressor, front ARB locker, garage fab aluminum front skid plate, custom built high clearence rear bumper, removable mothafuckin doors
    Hell ya! That was a fun lunch!

    And 18s? This thing is gonna be a flex monster! Perfect for that rti ramp lol
     
  18. Jun 23, 2014 at 6:07 PM
    #58
    donahoo

    donahoo Member

    Joined:
    May 12, 2014
    Member:
    #129690
    Messages:
    11
    Gender:
    Male
    alabama
    Vehicle:
    tacoma 6" 35s-20s
    6" fabtech, 35s/20s, 4:88s, k&n intake, magnaflow
    what kind of tool box is it that you have?? I really like the look..
     
  19. Jun 23, 2014 at 6:16 PM
    #59
    AR15xAR10

    AR15xAR10 Aka: "RainbowPuke"

    Joined:
    Apr 13, 2013
    Member:
    #102024
    Messages:
    22,274
    Gender:
    Male
    Vehicle:
    08 SR5 4x4 V6 IndigoInkPearl ACLBFTMFW
    "More than you can afford pal, TACOMA" WeatherTech Floor liners (front and rear), AVS vent visors, OEM Bed Mat, TRD (oiled) air filter, OEM Front Skidplate, OEM bed extender brackets, black plasti dipped grill emblem, ultragauge plus model, remote start, reese hitch, Grom Ipod interface, quickfists on custom bedrail mount to hold axe/shovel, EBC stage 5 super street brake kit, rokblokz mud flaps, superbrightleds map and dome LED lights (warm white), rear diff breather relocation mod, redline tuning Elite stainless hood struts, AFE Mach Force XP 2.5" stainless catback, Ionic Soft Trifold Tonneau, pop&lock, OEM LED tail lights, 35watt reverse light mod, full synthetic fluids, TOYWERX Custom thin lip satoshi, and STEEKERS Adding 4pin receiver harness,, painting afe tip flat black
  20. Jun 24, 2014 at 7:48 AM
    #60
    rctoy

    rctoy [OP] It's about to get real!!!

    Joined:
    Feb 13, 2012
    Member:
    #72789
    Messages:
    5,139
    Gender:
    Male
    First Name:
    konstantenos
    Pocatello Idaho
    Vehicle:
    First gen 4door monster in progress
    TRD super charger, URD fuel mods and 2.1 super grip pully, Headers, 2.5" glass pack, Dana 60 front 4 linked, 14bolt rears on chev 63's, 5.38 gears, ARB locker in the front, PSC full hydraulic steering, 18" SAW 2.5" triple rate coils overs, FOA 2.5 air bumps, B&M launch controls, B&M trans cooler, 4 alpine 6X8 type R's amped, Red led rock lights, CBI front and rear bumpers (my design) CBI sliders, 4 riggid dualys front 2 in the rear, custom track bar, ARB snorkle, warn VR8000 winch, Viair 480c twin compressers..
    Thats the idea. but as we all know an idea and reality are rarely the same so im gonna do my best to make it a reality. When i was ordering them the guy was like are you sure you dont want 14's or 16's 18 is a lot and i told him yeah i want 18's if my girlfriends not scared why are you..

    not one you can buy on a chelf. i found that tool box in the back of a one ton truck and cut it down to fit in my tacoma like that..
     
To Top