The SR thread, let's see them!

Looks good. Did you modify your original radio bezel?

 

I bought the radio bezel from a junk yard for 125.00 and took my outer bezel and put it on the new inner bezel. Also took the black rings off my old bezel and replaced the chrome rings around the vent to match black. Just basically took the stuff i liked off my old bezel and placed it on the new bezel to match the rest of the stuff.

 

its nice to have HD radio and Nav. XM i dont need but if i want it all i have to do is run the wire and its rdy.

 

Doesn't show well, but I painted the Toyota "T" a dark metallic. Not as dark as I would have hoped but I still like the color and it matches the color of the mudflaps logo. Did not want to go black or accent with another color.

 

Nice! What flares are those??

 

Lund SX125? I believe is the model name? Had to modify the fronts because of my bumper but fit was good, we shall see how they hold up!

 

It looks so much better than OEMs in my opinion. These look similar to 2nd Gen flares. Very nice!

 

This one is mine it’s not a 4x4 though 2018 SR with 7,000 miles got it for 25k.

 

Welcome

 

I've wanted to know what a white double cab without fender flares would look like with ray 10s for quite some time, thanks for finally answering that question for me!

 

Finally ventured out after 3 months of having my f5s. Went to a reputable tire shop. Of course they chipped 3 of the wheels where they mount to the balancing machine. I expected this so I told the owner and it wound up being free. Used rustoleum aged copper and a small paintbrush to touch up not a perfect match, but close enough for me. I have to paint my rear hubs still, dont really feel like pulling off the wheels, but I guess I'm gonna have to. Minor rubbing on the drivers side fender liner near the pinch weld fixed with massaging and a heat gun. Minor rubbing on the passenger side fender liner in the front near the bumper. Heat gun and massage took care of that too. I'm running 36 psi so well see how that works. Not sure about gas mileage yet. All I need now are fog lights and since I have a 2020 I'm gonna get the factory bed lights as well.

Specs:
265/75/16 Falken Wildpeak
16" x8 with 3.5 backspace -25mm offset

 

Seen where some of you were installing the 5100’s. Anyone installed on a 2WD SR?? I’ve been told to install the Off-Road Springs with 5100’s. Just curious what the ride quality is with stock SR Springs, if anyone has experience with this.

 

Not sure about 2wd trucks but my 4wd SR rides great on 5100’s.


2017 SR on stock steel wheels, 255/85r16’s, and ive got some rubbing on the control arm.



not sure what to do about it, other than new wheels or new tires, neither of which I’m really not in the mood for right now. Was the same at stock height and 2 inch lifted. Maybe a small 5mm spacer, if such a thing is made?

 

I've driven a 2wd TRD Sport with 5100's, but I think the V6 paired with the softer OME springs would make a difference.

Truck rode really nice, though. My Tough Dogs ride about the same.

 

I'm glad I didn't buy a set of those Cooper's now. I see they bloom just like the Hankook's that came out on this truck.

 

Installed new 255/70/17 Micheline Defender LTX on new TRD's - great tires if your looking for replacements

 

Meh, they get dirty a lot so I don't really care.

 

Got the Falkens on this weekend! Ready to test them out!

 

Got her dirty with @TailHook @OmegaMan73 @OnePuttBlunder and @Bikinaz Fun day! ​