The SR thread, let's see them!

I have the above wheel and tire package up for sale now. I upgraded to 20X10's.

 

Absolutely my favorite truck on TW. Nice job.

 

Added some 17x9, +12 vision Manx 2.. Stuck with the 265/65/17 instead of 70's to keep from working my 2.7l AT any more to death.. Tread lines up with the fender just right with this set up, the tire bulge is basically the only stance it has..

 

Hey folks, I asked this in the four cylinder section but didn't get much of a response. Does anyone know of a single inlet/dual outlet (y pipe/not true duals) exhaust system for the 2.7? I've looked on the forums and checked all the major companies' websites and haven't turned up anything. I have to confess its mostly a looks thing, to me trucks just look right with dual exhaust. Let me know!

 

Much love brotha

 

If im not mistaken, if the exhaust is listed to fit double cab short bed, or access cab long bed, then no matter what engine is installed, it will fit. The only differences are the length if its a double cab long bed. Lemme check and see if the stock exhaust is listed as the same part number for each engine option. Then just find one that works for you. I believe flowmaster has a kit that is what youre looking for

 

Now I'm not sure, 174300P450 is showing up for 3.5 and 174300C111 for the 2.7, however, when I got my aFe hi-tuck exhaust, it says it fits both engines...

 

Hey guys.
What is the offset of our SR steel wheels?
Do the tire fitment guides work for us
265/75 r16 works for us?

 

I think they are +30.

 

That's good to know! I appreciate you looking into that man. I've been wondering if they were interchangeable but had no way to verify one way or the other. I mean, if your aFe hi-tuck exhaust fits both engines... I would guess that would mean the rest of the 3rd gen exhaust options are also interchangeable?

 

And the TRD is a +25 mm
Is this right?

Was looking at the tire fitment chart but also came across something about rubbing from the big offset...

 

Upgraded over the weekend

 

Congrats on the upgrade!

 

Have the SRs been going up in price since the covid-19?

 

I'm having trouble finding anything online, what are the wheel specs on the 2020 SR? I know they're 16's, can't seem to find the width and offset anywhere though. I put 33's on and make contact with upper control arms at full lock, so looking at new wheels to try and mitigate that. Thanks!

 

From what I have read on TW , the list price is the same. Since inventory is low though, the dealers are holding closer to list price. I think the factory rebate has gone back down also. Here is my thread that I started about SR pricing although no one has posted their pricing for a while so you would have to search thru the regular thread for what folks have paid recently.
https://www.tacomaworld.com/threads/how-much-are-you-paying-for-your-2020-sr-model.664102/

 

The stock steel wheels are 7 inch wide and +30 offset. I recommend using tiresize.com to compare offsets. Going from +30 to 0 offset would push your wheels out almost an inch. You could get rub on the fender liner instead of control arms though

 

Thank you! I found an old thread on TW (after my post on this thread) that listed sizes but didn't know if it had changed since then.

 

I'm 95% sure they have not changed, if I remember correctly the offset is stamped on the inner wheel. I'll look at mine when I get a chance.