The SR thread, let's see them!

TY!

 

Finished my headlight project this morning before work. I completely gutted a set of OEM TRD headlights and swapped-in Morimoto M LED 2.0 projectors and a bunch of other goodies. Worked with a member here on a couple custom harness to get the DRLs and turn signals functioning to my liking.

 

Can you post up some side profile pics? Also is that the prinsu rack? How do you like it? What wheels and tires you running? They look extra meaty. Nice truck btw. Loving all the SR love.

 

Anyone have a picture of the plug and socket for the turn signal/drl on the SR/SR5s? I'm trying to see if the 3 pin plug on the SR line will fit in the 2 pin socket on the TRD headlamps. I though maybe the tail light plug would work but one of the tabs is slightly different.

Pic for ref:

 

Lately been hearing about the pull out leash for the rear seats so I decided to make some. Not to bad.

 

I never had to remove the center cap to put those black wheel skins on my steel wheels. I liked them just fine till I put a air chuck on the valve stems. I ripped those suckers off right then and there
and bought some Toyota OEM black allow wheels on Ebay and swapped the steel wheels out.

 

My 2019 SR V6 4X4 from brand new 18 months ago to now.
SCS F5 17x9 -38mm
@MESO Total Tail Stage 2, Ultimate Dome and Map lights, Gasshole, badges, and side markers.
Vleds V6 Extreme High, Low, Switchback DRLS. Vleds Switchback Reverse/Turnsignal bulbs.
K&N CAI, Borla muffler, tailpipe chop.
OEM leather wrapped wheel (eBay)
OEM intermittent wiper switch
OEM black led fog lights with OEM stalk.(I was pre-wired so OEM was a no brainer)
@no vtec 4me BHLM (EXCELLENT WORK)
Autozone fish eye blindspot mirrors, lol.
OvTune, but running the OEM updated B33 ECM at the moment and loving it.
Lots of matte black decals on the back window for added HP.
The Taco Garage Pro Grille Black Letter with OEM garnish.
Plasti Dipped V6 and 4x4 tailgate badges.
Probably forgetting some stuff...but I love this little truck!

 

This shit runs in the family. My 68 year old Mom's 09 Highlander...HOW COOL IS SHE?

 

Huh! I didn't even try and snap them on without taking the cap off, was just following instructions. Good thing I didn't go the whole way and take the lugnuts off, etc. lol. Oh Well. But, yes, what you did is my future plan!

 

how hard was it to install the fogs?

 

If you're pre wired it's pretty easy. The kit I got was from a Toyota dealer on eBay. Hardest part is swapping the stalks out (steering wheel has to be removed) but it's pretty straight forward. There is a thread on here that shows you how it's done. Just search SR fog light install. I suck at posting links, lol

 

@Nitori's OEM SR Foglight mod!
I think this is the thread

 

I followed the instructions also and the instructions I got with my wheelskins said it was not necessary to remove the center caps. It works either way though.

This is the guy I bought my wheels from. And he does have a set like mine for sale.

https://www.ebay.com/itm/TOYOTA-TAC...ck-16x7-6x139-7/184035195938?epid=16024000334

 

same wheels I just bought.

 

You cannot see mine very well but they are the like yours. they are kind of a pain because you have to dry them off after a wash or they look like crap.

 

Looks badass with those wheels and no flares!

 

I just installed a kit from eBay. I would say the ease of installation depends on how close to OEM you want. It's pretty straight-forward to do a basic install. The only pain is getting the wiring harness through the firewall. Get a long screwdriver and tape the wire to it. That'll make life a lot easier. The only issue I ran into is that the switch they include in all the kits is for the one big slot...which will have a clutch cancel switch if you have a manual transmission. I ended up grabbing a $5 switch from Napa, and mounting it by drilling a hole in the center of the cover for one of the small switch spots.

 

I'll have to get some better pictures. Picked this up after the hurricane this past summer. There's only one road in and out of my neighborhood, and wires were down in two places. I had to go set up my parents' generator, and ended up taking my Hyundai Accent through two tobacco fields to get onto the main drag. I decided I wasn't doing that ever again, and bought this on my way home. 2017 2.7L 4X4. URD just shipped my exhaust, so that should be on there soon. This is what I've done so far:
Carhartt seat covers
Reese hitch receiver
Weathertec hood protector
Weathertec window deflectors
Raised tailgate letters
Winjet foglight kit
Black Tacoma emblems
Wolo horn
TRD Pro grill w/raptor lights
01/10/2021 – Airaid 511-355 cold air intake
Victory 4X4 center console molle panels
Pedal Commander

 

That looks nice, what wheel / tire combo do you have?