Theses wheels fit?

First off the Tacoma and the 4Runner are very similar with wheels and tires. this is for the 4runner, mods/admin please feel free to move/close this thread if it violates any Code of Conduct due to this is not a tacoma.

Okay I am wanting some wheels for the T4R.. I have decided on these
Xtreme Alloys Series 6001.

They are doing to be 20's I know some of ya'll might hate, but I like them. My tacoma had 20's and 37's and the 4Runner is going to get 20's also.

I also have the toytec 3" lift and the 2" lift springs in the rear. I know I will need to do some trimming in the front, but a little cutting never hurt anyone lol


Here is a little bit of info on them

20x9, 6 on 5.5 Bolt Pattern
Backspace = 4.5 in.
Max Load = 2200lbs
Finish = Chrome
Hub Centric = Yes
Offset = -12mm

I know the bolt pattern is correct.
9" maybe a little to wide? but with the 4.5" BS are they going to fit?
Some may not like chrome, but they should flow well with my runner
I know our trucks are hub centric
and the offset is 12mm? does that sound right?
I plan on getting spidertrax wheels spacers 1.25" or so. If I get the spacers would the wheels fit correctly without rubbing the uca with a 33x12.50 sized tire?

thanks for the help everyone.
-Matt