1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Timbren SES springs

Discussion in 'Suspension' started by Gen 1 John, Feb 16, 2019.

  1. Feb 16, 2019 at 5:52 PM
    #1
    Gen 1 John

    Gen 1 John [OP] Member

    Joined:
    Jan 7, 2019
    Member:
    #278505
    Messages:
    11
    Gender:
    Male
    First Name:
    John
    Vehicle:
    2004 double cab
    strictly stock
    I installed a Timbren Suspension Enhancement System on my gen 1 Prerunner, but the rubber springs were too long. Timbren sent me the proper springs, but didn't want the original ones back. If somebody can use these springs, I'll send them to you for the cost of shipping. These springs are 5 and 1/8 inches long, so you'll need at least 6 inches clearance between the leaf spring and the frame (basically, they replace the bump stop.) The kit p/n is TORTAC4A, and the spring p/n is 535. You would be getting the springs only, with no hardware.
     

Products Discussed in

To Top