1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Top plate spacers

Discussion in '3rd Gen. Tacomas (2016-2023)' started by TRDTaco13, May 19, 2018.

  1. May 19, 2018 at 10:25 PM
    #1
    TRDTaco13

    TRDTaco13 [OP] Well-Known Member

    Joined:
    Mar 28, 2017
    Member:
    #214669
    Messages:
    152
    Gender:
    Male
    First Name:
    Avelardo
    Vehicle:
    2017 Dark grey Toyota Tacoma TRD off-road.
    So I have 2.5 lift on my Tacoma. So far there is very little to no lean on the driver side. If I was to put a 1/2 top plate spacer to get the full 3 inch. Will it cause the truck to lean more on the driver side? Or should I be good.
    I was originally thinking of adding a 1/2” top plate specter on driver and the 1/4” on the passenger.
    The lift is rancho with new coilovers and shocks and struts. 1.5 inch block in the rear. Might swap out for icon 1.5 leaf pack.
     

Products Discussed in

To Top