Toyota Tacoma Lamp Replacement Guide

Hello everybody!

We're excited to be a new member of the Tacoma World Forum community, so we figured we should introduce what we offer.

Looking for assistance with changing the lights in your Toyota Tacoma? Need an HID Kit or LED Kit? Or just looking for some replacements for your stock halogens?

Look no further than our Vehicle Lighting Guide, now with entries for 2017 Toyota Tacoma models!

We have an HID Kit for your Tacoma's H11 Low Beams, as well as LED kits for your H9 High Beams and H16 Fog Lights. We also carry Philips X-Treme Ultinon H16 LED Fog Light bulbs, available in Yellow and 6000K!

You can also find replacements for Turn Signal Lights, Backup lights, and other types of rear and interior lighting - see the Vehicle Lighting Guide for more specifics based on your trim level.

Light replacement information is available for previous Tacoma generations, and many other vehicle makes and models as well.

~Robert

 

Any tacomaworld member discounts?

 

No specific discounts, but what were you looking to order? I may be able to help

Danny

 

Hi Danny. Looking for the 2017 Toyota Tacoma LED kit. Product code off your website...Product Code: 30SI-0000-H11-LED-KIT.

Thank you!

 

Send me a PM and I'll work with you on the pricing

Danny

 

Any photos of your H11 extreme LED CMB in Tacoma fogs? do you know how well they match your xtreme 5k HID kit?

Thanks,
Steven

 

@itstoyota - Unfortunately I don't have any pictures of our H11 LED CMB bulbs in a Tacoma, but the color will be pretty close if you go with the 5000k kelvin temperature.

Keep in mind that the "CMB-series" bulbs are cosmetic upgrades. If you are looking to increase light output then I would suggest going with the H11 Xtreme LED, or the Philips H11 LED bulbs.

Steve

 

understood. are the Philips Ultinon bulbs that much of a difference? Those are just replacement bulbs too, correct?

 

Hi,

They are all technically plug+play replacements.

What trim level 2017 Toyota Tacoma do you have?

Steve

 

I guess my question is, are the Philips Ultinon an LED kit? Do they require the ballast looking box for the bulbs to work? My concern is wire management; I want to avoid having any excess wiring down below by the fogs. I want to upgrade the fogs primarily for aesthetics, but I don't want the light output decreased from stock either. Vehicle trim is TRD OR. Thanks for the help.

Steven

 

Hi,

Your truck uses an h11 bulb not an H16 (used in some trim levels). The

$40 Philips H11 CrystalVision Ultra Upgraded Bright White Headlight Bulb, 2 Pack

Philips H11 LED bulb will offer a similar light output to stock -- but much better color. The H11 Xtreme LED will be brighter then stock, and produce a better color to boot!
Steve

 

I’ve got a new 2018 SR5 and frequently drive through deer and hog country in West Texas. I’m looking for a plug and play fog light replacement with brighter output to help me see the critters farther down the road. Are the H11 / H8 / H16 PHILIPS X-TREME ULTINON LED FOG BULB my best plug & play option?

Jeff Lynch

 

Hi Jeff,

If you want a brighter plug n play fog light upgrade then I would recommend getting the H16 Xtreme LED Pro kit instead as it would be brighter then the Philips X-Treme Ultinon (1750 vs 700 lumens).

Danny