Toyota TRD OEM lift kit

It’s 1/4” between each of the three notches, so the middle should be 1.5” of lift. That’s my plan when I install it in a few weeks. I’ll also add the Icon 3 pack AAL for 1.5” front and rear

 

I just went to my local dealer to try and order. He told me I cant unless I buy the whole kit because of the toyota stop order. They also told me they couldnt get me my SEMA wheels either and 2 days later I had them. I just placed an order online for the shocks from another Toyota dealer online. Guess I will see if they show up

 

bummer. They cancelled my order saying I have to buy the whole kit.
I wonder if I would have any luck with any other dealers ordering from

 

Anyone running this kit with a camper shell (cap) on the back? I'm worried I might end up with a little sag on the rear end... or basically a negative rake.

 

Surely the shocks alone will continue to be available individually. They are going to wear out and need replacement, not going to buy a whole kit again.

 

so I just called another local dealer.
the part PTR13-35210 has a stop sale
he told me they have a new part numbers that are listed the same ptr13-35210 but adds FF and RR on them for front and rear.
He said they had the fronts in stock but the rears are on like a 22 part backorder. So I am just holding off till stock gets up more and can get them all at once. it was 159 for the fronts and 149 for the rears i believe is what he said.

 

Exactly what I'm dealing with
1/2 in sag in rear with ARE CZ cap

 

Anybody know why they won’t put it on a double cab long bed?? Will they flat out not install it on the truck if I buy the truck? I want a long bed, that sucks. Makes no sense, but I want a dealer installed lift

 

F the OEM rebranded Bilsteins and go with 5100s. I dont get all the hype over a trd sticker slapped on the same damn shock. Its not rocket science, I have the 5100s on a long bed. Do what you want and the hell with the dealer! The 5100s won't void the warranty!

 

1" ,1 1/2" ,2"

 

https://youtu.be/5Pf6iLk5CSI

 

https://youtu.be/bqf_OBAa6sM

 

Because you save like $150 for the same thing. Why would I pay that much more for the same thing. Plus when my needle bearing starts to vibe since I used trd shocks I can get it replaced under warranty. That money saved basically pays for a 3 leaf AAL

 

Is it really 5100 with the trd sticker ?

 

Pretty sure just valved a little different per toyota specs

 

i hear ya. I have straight up 5100s on my 2007 prerunner and the 33s rub a little backing up. I think the wheel offset may be the problem. I have been very happy with the 5100s for a 2” lift. I will likely do the exact same on the 2021 4x4 dclb im about to pull the trigger on. Just want a little bit bigger tires is all

 

They will replace the needle bearing with another POS OEM one. I did ECGS clamshell so I won't have to worry about it. Plus you get 5 settings as opposed to 3 with the re stickered TRD.

 

Has anyone put this lift on a Trd sport? I’d like to get an idea for how the on road ride is compared to the stock Trd sport suspension.

 

That red and silver looks good.

 

I’m having it done right now and can report back tonight.