TPMS module stuck in test mode

Hey all first post here, stumbled on quite the issue today

Truck in question is a 2006 Tacoma, I have recently replaced all my tire sensors including the spare with brand new autel sensors with a TS508 and had my TPMS light off and the system functioning normally for a few months until today. I just got a new MK808 scan tool and was digging around with it and ended up accidentally initiating a TPMS test.

Now the TPMS module live data reads it is in test mode and the light blinks rapidly without stopping. Ive tried the TC to CG pin jump and this gets the light flash to slow down but as soon as the jumper is removed the blinking goes back into rapid flash. No trouble codes are present on the module and the sensors are registering with their IDs and pressures. I have also tried to relearn the ecu on the sensor IDs with the TS508 but the tool gets an error redirecting me to the TC CG jump.

So it seems i am stuck in test mode, A test drive after caused no change and nothing online seems to get me any closer to a solution. Any help is greatly appreciated, Thank you all!

 

Not really sure, service info is kinda vague on it as well.