Tractors, Mowers, Chippers, Trailers, Chainsaws, Generators, Driveway Erosion Control, ETC.

I was wondering about you Dave, haven't been around in a few days. Everything ok?

 

Been running Thermocure in my 3205 radiator for about 6hrs total and ongoing. Top pic before and bottom right now. Stuff is working pretty well.

 

Home life stress…. Thanks for thinking of me…

 

Had to take 2x4 and 5lb hammer to beat this wheel off, I hate this design.

 

A lot of smaller tractors are like this…. Wtf you think is gonna happen in 10 years!! Stupid design

 

I hate flange bearing wheels as well. Converted both of my Cub 3000s to 4 lug boat hubs.

 

Presently battling a " no charge" situation on a 27 Kohler.

New stator and I still can't get it above 12.3 volts.

Walking away for a bit.

 

Try a different battery?

 

In 10 years? They want you to buy a new one every 3 years

 

New shoes are all mounted on farm trailer and gator.

 

Prior owner never secured the board ends, I flipped that one over that was warped pretty good and reattached it, used jack and cross beam for downward pressure on some of the boards.

 

It wasn't the battery.

Someone installed a 10 amp fuse in the battery circuit. It's supposed to have a 25.

I installed a new, correct 25 amp fuse and took it for a test cut. I figure if it didn't blow in 20 minutes, it hopefully won't blow unless there truly is a short.

 

Cheap fix score one for the good guys!

For some reason mine usually don't work out that way...

 

BXpanded piranha tooth bar finally showed up after 9 weeks (4-6 typ), went to install it and found out they sent a 49.5" bar instead of a 46.5" .

 

I need to order one of those

 

I have a 2025 JD with a 5' mower. Does a great job on my sheep pasture. Loader is perfect for spring manure sales. Always been a JD fan, my dad was a hay farmer. I grew up on the baler and mower.

 

Thanks man I usually cut 10 acres once a week with it. Hasn’t skipped a beat.