Transfer case level check

Hello,
What is the procedure to check the transfer case fluid level?
Same as the front/rear differentials?
thanks

 

Yes

 

Pretend its your new girl friend... just stick your finger in there and hope it comes out wet.

 

ok. dumbfounded why it was over filled so much. probably .5-.75 qt came outta fill plug.

 

Were you on level ground ?

 

Don't park facing uphill next time and insert slowly...

 

Drain it put in 1.1 Qts of straight 75W Toyota gear oil or similar like Ravenol

 

was in level garage. check with long level and a laser transom.

 

its right at full after checking it 2 different mornings. I havent put it in 4x4.
why drain and refill if its full? Just to confirm it did have 1.1 qt?

 

Assuming you're doing it correctly, how does 3/4 quart get above the fill plug when capacity is 1.1?

Transmission output-to-transfer case input seal leaking?

 

good question. Is it possible for tranny fluid to get over there or is that like lochness monster?