1. Welcome to Tacoma World!

    You are currently viewing as a guest! To get full-access, you need to register for a FREE account.

    As a registered member, you’ll be able to:
    • Participate in all Tacoma discussion topics
    • Communicate privately with other Tacoma owners from around the world
    • Post your own photos in our Members Gallery
    • Access all special features of the site

Transfer case shifter knob moving alot.

Discussion in '1st Gen. Tacomas (1995-2004)' started by TimPall13, Jul 19, 2016.

  1. Jul 19, 2016 at 10:39 PM
    #1
    TimPall13

    TimPall13 [OP] Well-Known Member

    Joined:
    Aug 1, 2012
    Member:
    #83897
    Messages:
    271
    Gender:
    Male
    First Name:
    Tim
    Sandy Oregon
    Vehicle:
    3link SAS 02 SR5 Limited V6
    Lift: TrailGear 3link SAS with Fox 2.0 Coil overs in front. Custom Alcan Leafs with relocated Fox 2.0 shocks in rear. Sitting at 6in of lift. Armor: Relentless Fab Front bumper with home made hoops and Warn VR Evo 10s winch. Relentless Fab Rear bumper with swingout gate. Gears/Grip: 4.88 gears with ARB Air lockers front and rear. 35x12.5 Mickey Thimpson Baja Boss MTs on 17in Trail Ready Beadlock wheels. Lighting: 6000k 55w HID head lights in Retrofit Prejectors, KC Slim Light LEDs behind a Grillcraft grill and on CBI windshield mounts, And LED rock Lights. Performance: 6" deckplate mod, URD Crank Pulley, K&N air filter, ISR mod, and a AirRaid throttle body spacer, magnaflow muffler. Audio: Alpine speakers and sub running on a Alpine 5ch amp. All ran with Stinger wire kit, and a Alpine touch screen reciever. Extras: 15% Window Tint, Spray in bed liner, LineX coated factoey fender flares, Custom Roof rack/Track system, SoftTopper Canopy, Viair Dual 444c Onboard air with dual 2.5Gal tanks.
    Hey guys,
    So I've been getting some vibration in my 02 at around 65mph. I figured it was prob just due to the 6" lift and 33" tires. Recently though I noticed that my transfer case knob moves (shaking action) a good amount when around that speed. Was wondering if this is normal for the trucks and if not, has anyone had to deal with this? I looked at the transfer case mount and seems fine but what appears to be the bolt In the center has about 1" gap from mount and the head. I looked at my friends Tacoma and his looked the same. Please let me know if that's wrong also. Any input would be great.
    Thanks
    Tim
     

Products Discussed in

To Top