TRD/ Magnuson 4.0 Supercharger Tips, Tricks, and Mods

I’d be surprised if you didn’t own any guns in the south

Please for the love of god teach her how to park without having to gauge distance by bumping into the car behind.

 

Even if I was still on the left coast, I'd own guns.

 

Didn't see much chatter on this when brought up a few days ago, but any one try the accel ignition coils?

https://www.holley.com/products/ign...el_coil_packs/toyota-lexus-scion/parts/140495

The reviews on Amazon made them sound pretty bad.

 

Stick to OE.

 

I just got myself a...



.30 cal air rifle

I believe the general consensus on those was that the stock ones have no issue and no one wants to put Chinese coils on.

 

I'm from the next state to the north. They haven't gone full retard yet, but no longer my concern.

 

Elaborate. I have an FX Impact .30cal and can hunt past 100 yards. People killing @300+ yards with it....

You don't need paperwork on PCP's/ Airguns. State lines and Borders are open to them. ‍♂️‍☠️‍☠️

 

Excellent! We own nothing by 3-pedal vehicles, so our son was forced to do all his driver training with an MT. He whined at the time but, now, is somewhat of a MT snob - drives an '04 5MT Tacoma and hopes to never own an automatic.

Most of his time was in my '04 5MT Tacoma and my wife's '05 6MT BMW 330xi, both of which had pretty forgiving clutches. He also got some left seat time in my '13 6MT GT500.
While he enjoyed Shelby drive time, it has (by far) the heaviest clutch I've ever driven. With 733 RWHP and 713 RWTQ, it's still somewhat forgiving, however.

 

Half retard to full retard is almost indiscernible to me nowadays

I haven’t ventured into the world of PCP’s yet. This one is just a Hatsan break barrel. 50 lbs breaking effort. Definitely a workout for my little asian self.

 

I'm still

 

I changed out my plugs at 30k as well, and they looked similar....

 

It's like I've been saying. These are nowhere near close to 100K plugs.

Maybe if we weren't boosted they would be, but all that extra fuel really fouls them out, that's why it's in our better interest to run them on the hotter scale because the hotter they are the better self cleaning properties they have, the longer they last, the less misfires, the better fuel economy.

 

I’m about to replace my plugs. I don’t know the miles but somewhere around 30k. They’re

$12 IKH24 Denso 5346 Spark Plug

IKH24, I know you’ve theorized in the past that’s too cold. Since I use water methanol injection, I’m wondering if that’s helped keep them clean. I will let you know and send pictures.

 

www.rippmods.com They have some in the works. Looking much more promising.

 

It did. Water is an excellent decarbonizer and that's also the reason why when you blow a cylinder head gasket the affected cylinders appear clean as a whistle.

You are basically steam cleaning/ pressure washing the internals of your engine every time you inject water/meth.

 

For anyone that did the Rousch tensioner and lfp double pulley. Did you trim the spacer in middle? When looking at original looks like the bolt grabbed the bearing not the spacer.

I emailed LFP and they said they machine the spacers and could make a different size. I’m gonna ask how much one is but if anyone else wants them maybe I should order a few.

also in having trouble sourcing a wide flange 10mm bolt like the one that came originally so I’ll need a washer but here is an ARP bolt kit that should work (also available in 30mm and other lengths)

https://arp-bolts.com/kits/arpkit-detail-b.php?RecordID=2926

 

Recently just asked and did this but yes you need to cut it.

get this and mark with a fine sharpie and cut.




Perfect match. You will need a longer bolt and or washer. I think M8x1.24 x30mm

 

I cut the spacer on my band saw, others used a pipe cutter. I reused a bolt from the SC install that fit just fine. Ace Hardware is my go to typically for finding single nuts and bolts.

 

Cool, I have a pipe cutter. I'll try that. I didn't think I could cut through something that thick with one.

I thought it would bounce around too much with a grinder and not cut flat.