Trd Off Road 2020 Black Vinyl wheel decals

ABOUT
The product is Premium outdoor vinyl "stickers" (Brand is ORACAL 651 MATTE Permanent Vinyl) that you will apply to the chrome area of your TRD OR wheel so that it blacks in out. I am a single mom with a full time job, but has a vinyl lettering "company" where I makes signs and random things for side money after her daughter is asleep.
So please tag or post link for other guys you know that might be interested or other threads where people might have interest!!

PRICING
"I'm ready to Vinyl" (full set of 25 "stickers") = $40 shipped anywhere in the USA.
If you are out of the USA, PM me and we'll figure something out.

"I messed up pack" (if you need a sheet of 6 more) = $10 shipped in the USA.

HOW TO ORDER
Pay via Paypal or Venmo
paypal: paypal.me/TacomaTRDVinyl (copy and paste this into the browser) or you can use the email to find within paypal. pthreeboutique@gmail.com
venmo: @stephanie-pike
Make sure to put your TW Username in the comments and what you are buying.
TRDOR im ready to vinyl
TRDOR i messed up pack

Expect delivery within 1 weeks MAX.

Also please choose peer to peer so Paypal doesn't take a chunk.
Then PM @PikestacoSister with your Paypal or Venmo username and address

WRITE UP

Here are the steps I used to apply the vinyl in case anyone is interested.

1. Clean the wheels really well. Key is to get all grease and oil off them. I cleaned them during the detail and then gave them another rub down with isopropyl alcohol.
2. Next, peel the back from the vinyl and line up the two inside top corners of the V-shape on the wheel. Lightly stick each of the corners.
3. Allow the vinyl to lay itself onto the wheel. Then take the side of your finger and work it from top to bottom. If you get any bubbles, just pull it up and lay it down.
4. Once it's bubble free, use your finger to stick it down but leave the edges where it overlaps the curves in the wheel.
5. Now take a heat gun on low and apply heat across the vinyl. The vinyl will "shrink" over the edges. Now use a finger to stick it down, working from the inside out. Again, it took my about 30 minutes for each wheel which includes cleaning. Pretty simple just gotta take your time. It looks pretty damn good and the vinyl should hold up pretty well. Makes the stock wheels look a bit more aggressive.

You do not have to use a heat gun. Also the best temperatures to apply the vinyl is 65-72 degrees, and out of the direct sunlight. If to cold the vinyl will become rigid and tear easily. Too hot and it will stretch.

Photos:



FAQ
As there are questions, i'll try and list them here with answers

for instructions on how to remove the center cap to place the colored vinyl see below (was given permission)

https://www.tacomaworld.com/threads...nyl-wheel-decals.537748/page-17#post-20997313

 

I hope everyone is well and trying to stay that way!!!
Flash sale this next week in honor of spring break or what would have been spring break 19% off all orders!!!!

 

Another happy customer.!!! Thanks you @DesertDuck2004

 

TRDOR im ready to vinyl
TRDOR i messed up pack

Sent Paypal.

 

Please find you tracking attached. Thank you!

 

@PikestacoSister , any luck getting this in the gunmetal color that matches the wheels?

No worries if not! Contemplating on pulling the trigger

 

We tried at the very beginning and there was nothing close. Matte black was the closest.

 

I figured as much. It's a hard color to match on vinyl. Thank you for the info